Laser powder bed fusion (LPBF), as the most commercialized metal additive manufacturing
technique, is tantalizing the metallurgical community owing to its capabilities of directly …

Additive manufacturing (AM) processes are pivotal in various manufacturing industries due
to their efficiency and ability to produce parts with complex structures and shapes. Metal …

The HEA-TiC high-entropy composite coatings with TiC (5, 10, 15 and 20 wt%) reinforced
FeCoCrNiCu matrix were fabricated by laser cladding to investigate their tribological …

Two kinds of CoCrFeMnNi high entropy alloy (HEA) coatings were prepared by high-speed
laser cladding (HS-) and normal laser cladding (N-), respectively. The phase, microstructure …

The particle size of the reinforcement affects the microstructure and mechanical properties of
the composites fabricated by selective laser melting. The powder bed characteristics were …

The W and extra/in-situ TiC reinforced CoCrFeNi high-entropy alloy coating was prepared
on a 45 steel substrate by laser cladding. The synergistic effect of W and ex/in-situ TiC on …

A novel AlCoCrFeNi 2.1 eutectic high entropy alloy (EHEA) composite doped with SiC
particles was designed and fabricated by laser powder bed fusion (LPBF). Its microstructure …

The CoCrFeNiTi x B 2x (x= 0, 0.1, 0.2, and 0.3) high entropy alloy (HEA) composite coatings
were prepared on Q235 substrates by laser cladding. The microstructure, grain orientation …

The design of metal matrix composites predominantly focusses on synergistically integrating
the intrinsic properties of matrix and reinforcing phase aiming to achieve outstanding …

At present, high fraction nano-TiC containing CoCrNi-4wt% TiC composite has been
obtained through laser powder bed fusion (LPBF) of the blends of elemental powders and …