mcSi and CdTe solar photovoltaic challenges: Pathways to progress
Multi-crystalline Si (mcSi) and CdTe solar photovoltaic technologies have gained significant
improvement. Shockley–Queisser (S–Q) limit consideration further progress of open-circuit …
improvement. Shockley–Queisser (S–Q) limit consideration further progress of open-circuit …
[HTML][HTML] Energy yield comparison between monofacial photovoltaic modules with monofacial and bifacial cells in a carport
In the photovoltaic (PV) industry, module manufacturers have begun to install bifacial cells
into monofacial modules because of their lower production costs relative to monofacial cells …
into monofacial modules because of their lower production costs relative to monofacial cells …
22.8% efficient ion implanted PERC solar cell with a roadmap to achieve 23.5% efficiency: A process and device simulation study
Among all available photovoltaic (PV) technology options, c-Si based passivated emitter
rear cell (PERC) has already proved its mettle by delivering more than 22% conversion …
rear cell (PERC) has already proved its mettle by delivering more than 22% conversion …
Performance and energy loss mechanism of bifacial photovoltaic modules at a solar carport system
As photovoltaic modules are increasingly used in renewable energy systems, ensuring
energy efficiency by reducing the levelized cost of electricity has become the focus of current …
energy efficiency by reducing the levelized cost of electricity has become the focus of current …
Design and parametric optimization of ion-implanted PERC solar cells to achieve 22.8% efficiency: a process and device simulation study
Silicon-based photovoltaic (PV) technology is considered the most favourable approach,
and has received great consideration worldwide, to possibly meet the ever-growing need for …
and has received great consideration worldwide, to possibly meet the ever-growing need for …
Process and device simulations aimed at improving the emitter region performance of silicon PERC solar cells
Achieved levels of silicon-based passivated emitter and rear cell (PERC) solar cells
laboratory and module-level conversion efficiencies are still far from the theoretically …
laboratory and module-level conversion efficiencies are still far from the theoretically …
25.7% efficient PERC solar cell using double side silicide on oxide electrostatically doped (SILO-ED) carrier selective contacts: process and device simulation study
Passivating contacts have recently considered as a superior carrier-selective contact
approach for high-efficiency silicon-based photovoltaic devices. However, the conversion …
approach for high-efficiency silicon-based photovoltaic devices. However, the conversion …
Characterization of Cost‐Saving Monofacial PERC Module under Field Conditions in South Korea
The photovoltaic (PV) industry is constantly striving to increase module power output while
decreasing costs. Importantly, the performance and reliability of cost‐saving products should …
decreasing costs. Importantly, the performance and reliability of cost‐saving products should …
Nanosecond pulsed laser patterning of interdigitated back contact heterojunction silicon solar cells
Careful control of the laser patterning for the fabrication of an interdigitated back contact
heterojunction (IBC-HJ) solar cell is needed to avoid laser-induced defects and heat …
heterojunction (IBC-HJ) solar cell is needed to avoid laser-induced defects and heat …
Properties of SiC-based luminescent composite thin film as light-harvesting material
In this study, we present the use of SiC/PVA composite thin films as downshifting layers
(LDS) in order to improve the photoelectrical parameters of a Si-based solar cell. We …
(LDS) in order to improve the photoelectrical parameters of a Si-based solar cell. We …