Laser cladding technology is a reliable and efficient surface modification technology, which
has been widely used in surface alloying and composite processing of steel materials …

To enhance the forming quality and mechanical properties of metal-based composite
coatings, WC-Ni60AA composite coatings were prepared on the surface of 65Mn via laser …

Mechanical properties of Ni-based superalloys strongly depend on γ′-Ni 3 Al precipitates
and hard particles. However, the traditional Ni-based composites have reached the …

The high-temperature corrosion characteristics of Inconel 625 and NiCrMoAl cladding layers
were investigated in molten NaCl-KCl and NaCl-KCl-K 2 SO 4. In NaCl-KCl, the corrosion …

In the study, the effects of mechanical alloying (MA) time and Cr content (wt%) on the
microstructure, density and hardness, electrical conductivity and oxidation resistance of Cu …

Abstract Herein, CoCr x CuFeMnNi (x= 0, 0.5, 1.0, 1.5, and 2.0, in molar ratio) high-entropy
alloys (HEAs) are fabricated by vacuum hot-pressing sintering (VHPS). The effect of Cr …

In this work, four BCC-structured VNbMoTaW and VNbMoTaWCr high entropy alloy (HEA)
coatings with different Cr contents were fabricated on the surface of 304 stainless steel …

To improve the wear resistance and corrosion resistance of 65Mn ploughshares, Fe–Mo
coatings were coated on the surface of the 65Mn steel. The microstructure, hardness, impact …

This study aimed to modulate the magnetic properties of selective laser melting NiFeMo
alloy. This was achieved via the controlled addition of Mo elemental in-situ alloying content …

Cu-Ag flake powders demonstrate strong potential applying as the conductive phase in
conductive polymer composite due to the good combination properties of electrical …