The hot compressive deformation behaviors of a typical Ni-based superalloy are
investigated over wide ranges of forming temperature and strain rate. Based on the …

A primary challenge associated with TiAl alloys is their low ductility at room temperature.
One approach to overcome this flaw is attaining ultrafine grains in the alloy's final …

Hot deformation behavior of a phosphorous-modified super austenitic stainless steel was
studied in the temperature range of 1173–1423 K and strain rate range of 0.001–10 s− 1 …

Uniaxial tensile tests of a typical Ni-based superalloy are conducted under the deformation
temperature range of 920–1010° C and strain rate range of 0.01–0.001 s− 1. The effects of …

The hot deformation behavior of powder metallurgy Ti–47Al–2Nb–2Cr alloy was studied by
using the activation energy map and processing map in this work. The isothermal …

Influence mechanism of B segregation on the microstructure evolution and hot ductility of
S32654 at 850–1250° C was systematically investigated through experimental research and …

Hot deformation behaviors and dynamic softening mechanisms of the 7Mo super-austenitic
stainless steel (SASS) were studied in the temperature range of 1000–1200° C and stain …

Hot compressive deformation behaviors of the aged nickel-based superalloy are studied
under the deformation temperature range of 920–1040° C and strain rate range of 0.001–1 …

In this study, the hot compression tests of 6X82 aluminum alloy were carried out at the
deformation temperature range of 300–500° C and strain rate range of 0.01–10 s− 1 on a …

Thermal-mechanical experiments of a newly developed Fe-Cr-Ni-Al-Nb superalloy were
conducted on a Gleeble simulator under the temperature of 900–1100℃ and the strain rate …