Corrosion is one of the most drawbacks which restricts the wide applications of Mg alloys. In
the last decade, the corrosion behaviors of Mg alloys with stacking fault (SF) and/or long …

Friction stir processing (FSP) using the same speed ratio was introduced as an alternative
method to process AZ31 magnesium alloy sheets to enhance their corrosion performance …

The hot tearing susceptibility (HTS) of Mg–xAl–yCa (x+ y= 8) alloys with different Ca/Al ratios
(namely 0.06, 0.34, 0.63, 1.04, 1.75, and 2.82) is experimentally investigated using a “T …

In order to solve the issues concerning high hot tearing susceptibility (HTS) of Mg-Al-Ca
series alloys, a rotating magnetic field (RMF) was applied during their solidification. The …

A high-pressure die casting (HPDC) Mg− 5Gd− 1.5 Sm− 0.7 Al alloy was newly developed
and exhibits outstanding strength-ductility synergy, with the yield strength and the tensile …

The influence of trace As content (0.04, 0.05, 0.06 wt%) on the microstructure and corrosion
behavior of AZ91 alloy in different metallurgical conditions (as-cast, as-quenched, peak …

The effects of addition of minor amount of (0.5 wt.%) antimony (Sb) or gadolinium (Gd) and
combined addition of Sb and Gd (0.5 wt.%, respectively) on the hot tearing susceptibility …

This study aims to investigate the influence of Sn addition on microstructure and corrosion
properties of AS21 magnesium alloys. The AS21 alloys with 0, 0.5, 1 and 2 wt.% Sn …

Nine kinds of rare-earth free Mg-Al-Sn-Mn magnesium alloys were designed by orthogonal
method. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray …

Abstract The 1.0 wt.% Ag addition or 1.0 wt.% Ag and 0.4 wt.% Sc addition on the
microstructure and age hardening response of Mg-11Al alloys have been systematically …