Ni (Si)/Ni5Si2 powders were produced by mechanical alloying (MA) of Ni–25at.% Si powder
mixture. Then, the as-milled powders were sprayed onto copper substrate using high …

S355 construction steel, a commonly used mild steel due to its exceptional strength, is prone
to environmental degradation, especially pitting corrosion in highly corrosive marine …

In this study, Ta was added to an L1 2-type Ni 3 (Si, Ti) alloy at different levels and into
different substitution sites, substituting for either Ni, Ti or Si. The solubility limits of Ta in the …

The pitting corrosion of Ni3 (Si, Ti) with 2at% Mo consisting of a single intermetallic
compound Ni3 (Si, Ti) phase of L12 structure and a two phase mixture of L12 and fcc nickel …

The pitting corrosion of Ni 3 (Si, Ti) intermetallic compound was investigated as function of
chloride concentration by using electrochemical method and scanning electron microscope …

The several components of steam turbine like the stator and rotor blade suffer from various
kind of wear caused by solid particle erossion during turbine running. This paper presents …

The pitting corrosion of Ni3 (Si, Ti) with 4 at% Al consisting of two regions of a Ni3 (Si, Ti)
single-phase of L12 structure and two phases of L12 and fcc Niss was investigated as …

The corrosion behaviour of the intermetallic compounds Ni 3 (Si, Ti)(L1 2: single phase), has
been investigated using an immersion test, polarization method, scanning electron …

1. Author retain copyright and grant the journal of first publication with the work
simultaneously licenced under Creative Commons Atribution Licence (CC BY-NC-SA 4.0) …

The corrosion behaviour of the intermetallic compounds Ni3 (Si, Ti)(L12: single phase), has
been investigated using an immersion test, polarization method, scanning electron …