Integration of additive manufacturing (AM) with Cold spray process is the latest solid-state
supersonic deposition method that has gained significant attention of future manufacturing …

Ni-base superalloys, like Inconel 625, are extensively used in several applications due to
their good performance at high temperature and their corrosion resistance. The high costs of …

When a complex geometry is rotated in front of the thermal spray gun, the following
kinematic parameters vary in a coupled fashion dictated by the geometry: Stand-off distance …

The plasma spray process with solid feedstock, mainly ceramics powders, studied since the
sixties is now a mature technology. The plasma jet and particle in-flight characterizations are …

The suspension plasma spray process is now emerging at the industrial scale, and open
questions remain regarding the formation of coatings through this process, especially …

The aim of this study is to evaluate comprehensively the effect of spray angle, spray distance
and gun traverse speed on the microstructure and phase composition of HVOF sprayed WC …

This paper presents an investigation of the influence of the spray angle on thermally sprayed
coatings. Spray beads were manufactured with different spray angles between 90 and 20° …

Splats are obtained on the substrates inclined at different angles (0°, 20°, 40° and 60°) by
plasma spraying process and characterized by SEM and WYKO® optical surface profiler …

Atmospheric plasma spraying (APS) is one of the most widely used thermal spraying
technique which finds a lot of applications due to its versatility of spraying a wide range of …

Residual stresses have been a major source of concern, as they are an inevitable
consequence of manufacturing and fabrication processes. The magnitude of these stresses …