A critical review of different prominent nanotechnologies adapted to catalysis is provided,
with focus on how they contribute to the improvement of selectivity in heterogeneous …

Fischer–Tropsch synthesis (FTS) is a process which converts syn-gas (H2 and CO) to
synthetic liquid fuels and valuable chemicals. Thermal gasification of biomass represents a …

Substituted phenols are the most recalcitrant oxygenates in conventional pyrolysis oils and
the dominant oxygenates in lower-oxygen content, formate-assisted pyrolysis oils (FAsP) …

Iron carbides are of burgeoning interest in both fundamental scientific research and fuel
technology due to their electronic, magnetic, and catalytic properties. They are arguably …

The conversion of syngas to hydrocarbons via Fischer–Tropsch synthesis (FTS) and to
alcohols via higher alcohols synthesis (HAS) are two important chemical reactions that …

Abstract Fischer-Tropsch Synthesis (FTS) is an important catalytic chemical reaction that
converts a mixture of CO and H 2 (syngas) derived from biomass, coal or natural gas into …

The Fischer–Tropsch synthesis was evaluated on cobalt based catalyst supported on a
medium surface area SiC foam ceramic in a fixed-bed configuration. The catalytic results …

Ligand-regulated growth of various morphologies of copper oxide (CuO) nanostructures has
been achieved through an aqueous-based chemical precipitation route where the Cu 2+ …

The hydrodeoxygenation of guaiacol (2-methoxyphenol) has been studied in a batch reactor
over alumina-and SBA-15 silica-supported molybdenum nitride catalysts at 300° C and …

Low cost and high efficiency catalysts for the reductive amination of carbonyl compounds
are critical to the utilization of renewable biomass. In this paper, a highly efficient N-doped …