[HTML][HTML] Physics based models for characterization of machining performance–A critical review
This paper presents a comprehensive review of the concept of machinability by considering
the dynamic, tribological, and thermo-mechanical interactions encountered at the tool-chip …
the dynamic, tribological, and thermo-mechanical interactions encountered at the tool-chip …
Mechanics of thrust force on chisel edge in carbon fiber reinforced polymer (CFRP) drilling based on bending failure theory
D Wang, F Jiao, X Mao - International Journal of Mechanical Sciences, 2020 - Elsevier
Abstract CFRP (Carbon Fiber Reinforced Polymer) is widely used in the aerospace,
automobile and construction industries. Its non-homogeneous and anisotropic nature often …
automobile and construction industries. Its non-homogeneous and anisotropic nature often …
Multiple sensor monitoring of CFRP drilling to define cutting parameters sensitivity on surface roughness, cylindricity and diameter
Machining parameters affects the final quality of components made in carbon fiber
reinforced plastic (CFRP) composite materials. In this framework, the work here presented …
reinforced plastic (CFRP) composite materials. In this framework, the work here presented …
Analysis and prediction of axial force and exit damage in drilling of composites with delamination damage
S Zhang, J Hu, L Xu, J Shen, S Xuan, W Tian - Journal of Manufacturing …, 2024 - Elsevier
In aircraft maintenance, the delaminated composites are commonly repaired by riveting to
inhibit delamination propagation and restore load-bearing performance. Making connecting …
inhibit delamination propagation and restore load-bearing performance. Making connecting …
Study on dynamic drilling forces of CFRP/Ti stacks during longitudinal-torsional ultrasonic vibration drilling
D Wang, Z Li, S Tian, T Li - The International Journal of Advanced …, 2023 - Springer
LTUV (longitudinal-torsional ultrasonic vibration) makes cutting speed change rapidly; it is
obvious that the rapid change makes the cutting edge become sharp and drilling force …
obvious that the rapid change makes the cutting edge become sharp and drilling force …
Twist drilling SPH simulation for thrust force and torque prediction
IS Boldyrev, DI Topolov - IOP Conference Series: Materials …, 2020 - iopscience.iop.org
Drilling is one of the most common processes in metalworking. The cutting forces that occur
during the drilling process have a significant impact on the accuracy and quality of the holes …
during the drilling process have a significant impact on the accuracy and quality of the holes …
Innovative comparison of coated carbide drill bit with HSS drill bit for material removal rate on novel CNC drilling of magnesium alloy/silicon carbide composite
A Karthik, A Muniappan - AIP Conference Proceedings, 2024 - pubs.aip.org
The major purpose of this research is to compare the material removal rate (MRR) of a high-
speed steel (HSS) drill bit with that of a novel composite drill bit consisting of magnesium …
speed steel (HSS) drill bit with that of a novel composite drill bit consisting of magnesium …
Comparison of carbide and PCD drill bit with HSS drill bit for thrust force in the drilling of novel Al6061/SiC/Gr composite
S Nethaji, A Muniappan - AIP Conference Proceedings, 2023 - pubs.aip.org
To compare the Carbide and PCD drill bits with the HSS drill bit for thrust force in drilling
Al6061/SiC/Gr novel hybrid composite. Experimental group was the Carbide drill bit and the …
Al6061/SiC/Gr novel hybrid composite. Experimental group was the Carbide drill bit and the …
Chip Formation in Drilling
IS Boldyrev, SD Smetanin, DY Topolov - Russian Engineering Research, 2021 - Springer
The cutting forces in drilling significantly affect the accuracy and quality of hole machining.
The unbalanced radial component of the cutting force increases the hole diameter and …
The unbalanced radial component of the cutting force increases the hole diameter and …
Twist Drilling FEM Simulation for Thrust Force and Torque Prediction
IS Boldyrev, DY Topolov - Proceedings of the 6th International Conference …, 2021 - Springer
Drilling is one of the most common processes in metalworking. The cutting forces that occur
during the drilling process have a significant impact on the accuracy and quality of the holes …
during the drilling process have a significant impact on the accuracy and quality of the holes …