The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from
aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated …

Two biosorbents were prepared using bamboo powder modified with mercaptoacetic acid
and carbon disulfide, which exhibits strong adsorption properties for Cu 2+ and Ni 2+. The …

In order to develop a low-cost and high efficient absorbent, cellulose was extracted from
peanut hulls, soybean shells and grapefruit peels using 17.5% NaOH and then …

This investigation enumerates the treatment of phenol contaminated synthetic wastewater by
Activated Waste Tea Leaves (AWTL). Phosphoric acid was used for the modification of …

Biosorptive treatment using algal biomass of Rhizoclonium riparium was proposed for
higher-loading gray water for its effective utilization. A batch sorption study was conducted …

Peanut hull powders were chemically modified using mercaptoacetic acid to develop a
convenient, lowcost, and highly efficient adsorbent for the removal of Hg (II) from aqueous …

Existing techniques for the treatment of pollutants include membrane separation, ion
exchange, precipitation, transformation and biosorption. Of all of this technology, biosorption …

Abstract Treatment of high organic loading composite wastewater was conducted using
ceramic microfiltration process alone and in combination with a novel biosorbent prepared …

Established approaches for the management of contaminants include things like membrane
separation, ion exchange, precipitation, transformation and biosorption. Of all of these …

Biosorption of copper (II) using walnut shell powder (WNSP) appeared to be an efficient and
effective decontamination method. XRD revealed the amorphous nature of the biosorbent …