Tribo-electrochemical behavior in physiological solution of two β-type (100-x)(Ti-45Nb)-xGa
(x= 4, 8 wt%) alloys, alongside β-Ti-45Nb and medical grade Ti-6Al-4V ELI, was …

TiB 2 and TiB double layers were formed on surface of Ti-6Al-4V by a diffusional process at
850 ͦ C for 4–16 h. EIS and XPS analyses revealed that formation of a passive film on the …

In order to meet the clinical demand for titanium implants, the heterogeneous structure of TiO
2/SrTiO 3 coating was in situ fabricated on the surface of Ti6Al4V alloy by a facile way. The …

Anti-corrosion and anti-wear properties of S420 high-strength low-alloy (HSLA) steel in
different marine environments are very important in practical applications. The present work …

Abstract Four Mo-Si-B alloys were manufactured using a non-consumable arc melting
method. The structure, wear behavior, and tribocorrosion performances in 3.5 wt% NaCl …

Surface modification of titanium and its alloys has been seriously considered by researchers
to improve their biological behaviors, in the past few decades. In present research …

It is well known that applying Nisingle bondTi intermetallic coatings on the surface of
different alloys can improve their tribological behavior. In this paper, various intermetallic …

TiB 2+ TiB coatings were formed on Ti–6Al–4V through a molten-salt diffusional process at
temperatures of 850° C and 900° C for 16 h. The thickness of the TiB layer increased by …

Tribocorrosion of titanium alloys improves by thermal oxidation which results in formation of
an oxygen diffusion layer (ODL). However, the formation of ODL decreases the …

The paper focuses on the SiO x-doped amorphous hydrocarbon (aC: H: SiO x) coating on
the titanium (Ti-6Al-4V) alloy substrate obtained by plasma-assisted chemical vapor …