Magnesium alloys with high lithium concentrations possess a lightweight body centered
cubic (BCC) matrix structure with densities in the range of 1.3–1.65 g/cm3. These alloys …

Abstract For ultralight Mg–Li alloys, the improvement of strength is the most concerned
issue. In this work, we successfully realize the incredible enhancement of strength in the Mg …

In this review paper, the research progress on corrosion behavior of hexagonal close-
packed (HCP) singular phase, body cubic-centered (BCC) singular phase and (HCP+ BCC) …

Abstract Different Mg (Li)-M (M: Al, Fe, Cr) layered double hydroxides (LDHs) films were
successfully prepared on Mg-Li alloy with in-situ growth method. Further, the corrosion …

In this work, the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various
temperatures are investigated. The results show that the strengthening after quenching is …

Abstract In this study, AlSi10Mg alloy were prepared by powder-delivery laser powder
deposition (LPD) process. In order to obtain AlSi10Mg alloy with maximum density, LPD …

The effects of combined addition of Y and Ce on the microstructure, mechanical properties
and anisotropy of as-rolled Mg-8Li-1Al (LA81) alloy were studied. The combined addition of …

Abstract Effect of Zn on the corrosion behaviours of Mg-11Li-xZn (x= 0, 1, 3, 6; termed as
L11, LZ111, LZ113, LZ116) alloys in 0.1 M NaCl solution has been investigated. The results …

Hot compression tests in the temperature range of 493-653 K and strain rates of 0.01-10.00
s− 1 were used to evaluate the hot deformation behavior of 60Mg-30Pb-9.2 Al-0.8 B alloy. In …

Achieving the desired hardness in Al-Mg alloys through experimentation is challenging,
costly, and time-consuming, given the extensive composition variations and diverse aging …