Maximizing the electrochemical efficiency of Ce doped SnFe2O4 through hydrothermal route for supercapacitor applications
Improving the ion/charge transport kinetics, chemical activity of surfaces and reduction of ion-
diffusion pathways in metallic oxides with nanoscale structures is an important challenge in …
diffusion pathways in metallic oxides with nanoscale structures is an important challenge in …
Cobalt‐Based Materials in Supercapacitors and Batteries: A Review
Energy demand has become a persistent concern and high‐performance energy storage
systems have increasingly undergone development. Supercapacitors and batteries pose …
systems have increasingly undergone development. Supercapacitors and batteries pose …
Synergistic optimization of nanostructured graphene oxide based ternary composite for boosting the performance of supercapacitor electrode material via response …
Energy storage and environmental pollution are currently the two main issues facing the
world. In light of the finite bestow of fossil fuels, the generation of renewable energy has …
world. In light of the finite bestow of fossil fuels, the generation of renewable energy has …
Preparation of ferromagnetic perovskite La0.65Sr0.35MnO3 electrodes for supercapacitor applications
W Yang, I Zhitomirsky - Journal of Materials Science: Materials in …, 2024 - Springer
Abstract Ferromagnetic perovskite La0. 65Sr035MnO3 (LSM) is prepared as an active
material for electrodes with high active mass loading of 40 mg cm− 2 for applications in …
material for electrodes with high active mass loading of 40 mg cm− 2 for applications in …
Fabrication and electrochemical insights into advanced rGO-modified ternary Cu-doped NiFe2O4/TiO₂ electrodes for high performance supercapacitors
In this study, we employed a comparative approach by evaluating the composites CuFe 2 O
4-rGO-TiO 2 (CFRT4), NiFe 2 O 4-rGO-TiO 2 (NFRT5) and Cu 0.5 Ni 0.5 Fe 2 O 4-rGO-TiO 2 …
4-rGO-TiO 2 (CFRT4), NiFe 2 O 4-rGO-TiO 2 (NFRT5) and Cu 0.5 Ni 0.5 Fe 2 O 4-rGO-TiO 2 …
Investigation of structural and optoelectronic integrity of Sm3+ doped CaWO4 for LED applications
In this study we illustrate the structural, electronic and optical integrity of Ca 1-x Sm (2/3) x
WO 4 (x= 0.00, 0.02, 0.04, 0.06 and 0.08) crystals for optoelectronic applications via …
WO 4 (x= 0.00, 0.02, 0.04, 0.06 and 0.08) crystals for optoelectronic applications via …
Room temperature AC properties and impedance analysis of Mg ferrite/polypyrrole (PPy) and Mg ferrite/reduced graphene oxide (rGO) composites
The auto-combustion sol–gel method has been used to synthesize a powder sample of
MgFe2O4 nanoparticles. Nanocomposites of Mg-ferrite/PPy and Mg-ferrite/rGO have been …
MgFe2O4 nanoparticles. Nanocomposites of Mg-ferrite/PPy and Mg-ferrite/rGO have been …
Nickel substituted cobalt ferrites via ceramic rout approach: Exploration of structural, optical, dielectric and electrochemical behavior for pseudo-capacitors
T Zeeshan, E Tahir, S Waseem, MD Ali, S Anjum - Ceramics International, 2024 - Elsevier
Nickel doped cobalt ferrites (Co 1− x Ni x Fe 2 O 4) has been synthesized with the variation
of Ni dopant (x= 0.0, 0.25, 0.50, 0.75) by ball milling route at 150 RPM for 3hrs. The impact of …
of Ni dopant (x= 0.0, 0.25, 0.50, 0.75) by ball milling route at 150 RPM for 3hrs. The impact of …
Annealing-mediated tuning of sol-gel synthesized CoFe2O4 nanoparticles for supercapacitor
SR Shingte, TD Dongale, C Manisseri… - Nanomaterials and …, 2024 - icevirtuallibrary.com
In this study, cobalt ferrite nanoparticles (CFO NPs) were synthesized by sol-gel method and
annealed at different temperatures (350° C, 650° C, and 800° C) for supercapacitor …
annealed at different temperatures (350° C, 650° C, and 800° C) for supercapacitor …
[PDF][PDF] FABRICATION AND STRUCTURAL STUDIES OF SPIN-COATED COBALT FERRITE LAYERS
K Gayakvad, KK Patankar, S Swami… - Suranaree Journal of …, 2024 - researchgate.net
Cobalt ferrite coating of various layers is fabricated on fluorine-doped tin oxide (FTO)
substrate using a spin coater. A precursor sol of 0.1 M metal ion concentration is employed …
substrate using a spin coater. A precursor sol of 0.1 M metal ion concentration is employed …