In situ tensile tests, accompanied by scanning electron microscopy coupled with electron
backscatter diffraction (EBSD) analyses were performed on neutron-irradiated 304L steel …

High performance materials, from natural bone over ancient damascene steel to modern
superalloys, typically possess a complex structure at the microscale. Their properties exceed …

The preferred deformation mechanisms with respect to the load path are studied in a
medium stacking fault energy 304 austenitic stainless steel that exhibits both transformation …

Biaxial tensile tests are performed on two phase duplex stainless steel using a newly
developed multiaxial testing rig integrated with a digital image correlation map** facility. A …

Surface mechanical attrition treatment (SMAT) is a powerful and practical method to surface-
harden metals and alloys through the generation of a gradient nanostructured surface. In …

During practical forming processing, strong anisotropic mechanical behavior of dual phase
(DP) steels is usually detected due to texture, which further determines subsequent …

In this study, a miniaturized cruciform-shaped sample geometry which allows reaching high
plastic strain under equibiaxial loading with reduced thickness at the test section is …

A new Ni-rich structure was found at the steel grain boundaries in front of oxide/matrix
interface through the method of small-angle inclination polishing. This structure is coherent …

The transformation induced plasticity (TRIP) effect is investigated during a load path change
using a cruciform sample. The transformation properties are followed by in-situ neutron …

In situ mechanical tensile tests coupled with electron backscatter diffraction (EBSD) analysis
were conducted using specimens of two 304L steels with~ 8 and 10.4% Ni content …