Purpose The usage of additive manufacturing (AM) technology in industries has reached up
to 50 per cent as prototype or end-product. However, for AM products to be directly used as …

New microproducts need the utilization of a diversity of materials and have complicated
three-dimensional (3D) microstructures with high aspect ratios. To date, many …

Photopolymerization is a widely used polymerization method in many engineering
applications such as coating, dental restoration, and 3D printing. It is a complex chemical …

Due to its high printing resolution and fast printing speed, digital light processing (DLP) has
become one of the most widely used additive manufacturing technologies. In a typical DLP …

Additive manufacturing, more specifically digital light processing as a form of vat
photopolymerization, has attracted great interest and plays an important role in many …

A cost-effective stereolithography for medium-scale components is developed to fabricate
3D components with high build speed and resolution from photo-curable resin. The …

The rapid prototy** (RP) process is the fastest and most feasible method for prototype
construction. However, with the use of any material or build method the phenomenon of …

In this study, the temperature evolution during stereolithography (SL) processing of a
commercial epoxy resin is experimentally measured and numerically simulated …

The mask-image-projection-based stereolithography process (MIP-SL) using a digital
micromirror device (DMD) is an area-processing-based additive manufacturing (AM) …

Thermosetting resins are converted into three-dimensional networks via a polymerisation
reaction known as cure. This reaction determines the resin morphology that, in turn, will …