Electromagnetic launching manufacturing (EMLM) is a high-speed material processing
technique powered by pulsed current. The hammer velocity is a key indicator in EMLM, but it …

Friction stir processing (FSP) was carried out in AA6063 alloy using the tools with different
pin eccentricities (0 and 0.6 mm) under different cooling rates. Results showed that the FSP …

Electromagnetic joining technology is widely utilized in assembling tubular components due
to its ability to exert uniform magnetic pressure. To augment this pressure, a field shaper …

Thin-walled structures are widely used in the automobile, aerospace, and other engineering
disciplines for impact energy absorption purposes for their lightweight and high energy …

The aim of this study was to investigate the effects of the sintering temperature and Ni/Fe
ratio on the ballistic performance of liquid-phase sintered tungsten heavy alloys. The powder …

Component reliability can be estimated by either statistics-based methods with data or
physics-based methods with models. Both types of methods are usually independently …

In this study, the effect of sintering temperature on the high strain rate-deformation of 93W-
5.6 Ni-1.4 Fe, 93W-4.67 Ni-2.33 Fe, and 93W-3.5 Ni-3.5 Fe alloys was investigated. The …

Tungsten heavy alloys (THA) are used in the defense industry for subcaliber bullet cores
due to their high density and strength. Typically methods of joining tungsten rod elements …

This study shows the results of Ni replacement with Co in a W-Ni-Co-type tungsten heavy
alloy (WHA) in terms of the structure and mechanical properties. Five alloys containing 92 …

Deformation machining (DM) is a combination of thin structure machining and single-point
incremental forming/bending (SPIF/SPIB). This process enables the creation of complex …