The harnessing of heat emanating from powder-based exothermic reactions to produce
advanced materials has been around for many decades, and is manifested in the process of …

Metal injection molding (MIM) is a near net-shape manufacturing technology that is capable
of mass production of complex parts cost-effectively. The unique features of the process …

Nickel aluminide intermetallic compounds possess attractive properties that make them
good candidates for high temperature structural applications. The production of these …

Microstructures arrested at different stages of completion in case of both the modes of self-
propagating high-temperature synthesis (SHS) of NiAl were studied in detail to compare the …

A combustion front quenching method (CFQM) was used for investigating the mechanism of
self-propagating high-temperature synthesis of NiAl from Ni and Al powders. The …

In this study, the abrasive wear behavior of Fe3Al, TiAl, Ti3Al, Al3Ti, NiAl, Ni3Al and MoSi2,
and composites based on these compounds, were assessed and compared to the behavior …

Directed Light Fabrication (DLF) is a rapid prototy** process being developed at Los
Alamos National Laboratory to fabricate metal components. This is done by fusing gas …

Abrasive wear of NiAl and NiAl with 10, 20, and 40 vol.% TiB2 has been investigated using
particles of different types and sizes. The addition of TiB2 as a particulate reinforcement to …

Considerable research has been performed on NiAI over the last decade, with an
exponential increase in effort occurring over the last few years. This is due to interest in this …

The self-propagating high-temperature synthesis (SHS) of 0–40wt.% ZrB2 or 40wt.% TiB2
reinforced Ni–Al matrix composite powders has been investigated. The SHS reactions were …