Structure parameters and designs and their impact on performance of different heat exchangers: A review

HA mohammed Hussein, R Zulkifli… - … and Sustainable Energy …, 2022 - Elsevier
In this paper, after a short review of the heat exchangers (HEX) types and applications with
different technologies was presented, a lot of parameters which mainly affect the thermal …

Air side performance characterization of wavy Fin-and-tube heat exchangers having elliptic tubes with large waffle heights

YT Lee, LH Chien, J He, CY Wen, AS Yang - Applied Thermal Engineering, 2022 - Elsevier
Demand of less energy consumption and higher energy efficiency suggests increasing heat
transfer performance of a fin-and-tube heat exchanger. This paper experimentally and …

Thermal-hydraulic performance enhancement of fin-and-tube heat exchangers using carbon nanotube coatings under dry and wet conditions

H Seok, C Han, D Lee, Y Kim - Applied Thermal Engineering, 2023 - Elsevier
Carbon nanotube coatings have been widely adopted in various heat transfer fields to
improve their heat transfer performance. However, comprehensive studies on the thermal …

Energy improvement and performance prediction of desiccant coated dehumidifiers based on dimensional and scaling analysis

WD Chen, P Vivekh, MZ Liu, M Kumja, KJ Chua - Applied Energy, 2021 - Elsevier
The evolution of an in-depth understanding and accurate prediction of the dehumidification
performance of a solid desiccant coated heat exchanger dehumidifier (SDHED) is severely …

Innovative analysis of local and average air-side heat transfer coefficients in fin-and-tube heat exchangers using CFD and experimental method

M Marcinkowski, D Taler, J Sacharczuk, K Węglarz… - Energy, 2024 - Elsevier
In this study, the Nusselt numbers (heat transfer coefficients) of the air side of a finned heat
exchanger were investigated by comparing experimental measurements with CFD …

Numerical investigation on thermal-hydraulic performance of leeward cut annular finned tubes in crossflow heat exchangers: An insight on fin material saving

M Raje, AK Dhiman - International Journal of Thermal Sciences, 2024 - Elsevier
The objective of the current study is to analyse the hydro-thermal characteristics of leeward
cut fins with various trimming values and finalise a specific fin that benefits by maximum …

Experimental study on flow around a tube in mixed tube bundles comprising cam-shaped and circular cylinders in in-line arrangement

S Abolfathi, AM Lavasani, P Mobedi… - International Journal of …, 2021 - Elsevier
Flow and heat transfer around a tube in mixed tube bundles composing of cam-shaped and
circular tubes were investigated in an experimental study. The tube bundle is consisting of …

Comparative analysis of thermo-hydraulic performance on three different finned tube designs

J Cui, X Zhu, M Li, R Lin, G Ma, Y **, X Hu… - … Communications in Heat …, 2025 - Elsevier
This study systematically investigates the thermo-hydraulic performance of three finned tube
designs—annular finned tubes (AFT), serrated finned tubes (SFT), and nail-head finned …

Heat transfer characteristics of fin-tube heat exchangers coated with single-walled carbon nanotubes under various coating concentrations

C Han, S Lee, D Lee, M Lee, J Kim, Y Kim - … Communications in Heat and …, 2024 - Elsevier
The application of single-walled carbon nanotube (SWCNT) coatings to heat exchanger
surfaces can improve energy efficiency owing to its excellent thermal properties. However …

Effect of graphene-based nanofluid on heat transfer performance of alternate elliptical axis oval tube heat exchanger

D Nagaraju, AR Mohammad - Applied Nanoscience, 2022 - Springer
The comparative heat transfer analysis of alternative elliptical axis oval tube (AEAOT)
carrying graphene/water-based nanofluids at various volumetric concentrations and …