Spark plasma sintering (SPS) is an advanced pressure-assisted sintering technology that
combines the application of uniaxial pressure with rapid current-induced heating. The so …

Spark plasma sintering as the prominent field‐assisted sintering technique (FAST/SPS) is a
novel technology for the rapid, pressure‐assisted consolidation of powder materials. The …

A superiority in interfacial bonding is favorable to fabricate high-strength conductive
composites for electrical contact applications. In the present work, high strength and high …

Ultrafine-grained Al2O3− RE: YAG (RE= Ce; Ce+ Gd) composite ceramics were obtained for
30 the first time by reactive SPS using commercially available initial oxide powders. The …

Diffusion bonding is a viable technique for fabricating larger parts or composite transparent
ceramics. Spark plasma sintering (SPS) and hot isostatic pressing (HIP) allow for …

Applying pressure during sintering of ceramics is a common practice, allowing for significant
reduction in processing temperature, and fabrication of dense specimens with fine-grained …

Abstract Ce 3+ doped Lu 3 Al 5 O 12 (Ce: LuAG) ceramics were fabricated by the solid-state
reaction method through spark plasma sintering (SPS) from 1350° C to 1700° C for 5 min at …

This paper presents a review on the preparation of glass-ceramics (GCs) and, in particular,
transparent GCs by the advanced processing technique of spark plasma sintering (SPS) …

Neutron flux measurement has a critical role in reactor safety. A potential novel sensor
development is through the use of fissionable and fissile isotopes doped into yttrium …

Spark plasma sintering (SPS) is an advanced one-stage, rapid, near-net shape densification
technique combining uniaxial pressure with resistive heating. Various transparent ceramics …