The thermal barrier coatings (TBCs) provide insulation to the components of gas turbine by
providing higher amount of thermal energy and also reduce the cooling requirement of the …

Double ceramic layer (DCL) TBCs consisting of a top 20 wt.% Al 2 O 3-7YSZ layer and a
bottom 7YSZ layer were desirably designed to achieve preferable performance while the …

Rear-earth doped advanced thermal barrier coatings (TBCs) have been developed by in-
situ do** of Gd into YSZ matrix by atmospheric plasma spray coating of YSZ and Gd 2 O 3 …

The embrittlement of thermal barrier coatings (TBCs) in a high-temperature service
environment inhibits the ability of the top-coat to resist crack initiation and propagation, in …

To enhance the fretting wear resistance of Ti60 titanium alloy, a YAG coating was applied to
the surface using the APS (atmospheric plasma spray) process, followed by an investigation …

Alumina-yttria stabilized zirconia (Al 2 O 3-YSZ) composite coatings are recognized as a
potential alternative material for thermal barrier coatings. In this paper, Al 2 O 3-YSZ …

Ni-Fe coatings have been recently developed to use for various industrial applications;
however, their relatively inappropriate corrosion resistance have restricted their beneficial …

In this research, the tribological and corrosion protection properties of atmospheric plasma
sprayed Cr 2 O 3-20YSZ (CZ) and Cr 2 O 3-20YSZ-10SiC (CZS) composite coatings on 304 …

The thermal insulating performance of plasma-sprayed thermal barrier coatings (PS-TBCs)
depends dominantly on inter-splat pores, which would be inevitably healed during high …

Hydrophobic/icephobic coatings have been fabricated using a combination of thermal
sprayed metallic MCrAlY (M= Ni, Co) coatings with a subsequent deposition process using …