Understanding the interaction between cyclic stresses and corrosion of magnesium (Mg)
and its alloys is increasingly in demand due to the continuous expansion of structural …

The damage to a metal is significantly enhanced when simultaneously exposed to a
corrosive solution and a cyclic mechanical stress. However, decoupling the contributions …

The effects of ultrasonic impact treatment (UIT) on stress corrosion cracking (SCC) of 7075
aluminum alloy and its welded joints have been investigated. The microstructural evolution …

Corrosion-fatigue behavior of friction stir welded AA2024-T3 is investigated in a 3.5% NaCl
solution. Corrosion-damage analysis of the tested specimens shows that the heat-affected …

The present work investigates the microstructure and electrochemical behaviour of the joints
formed with and without induction-assisted friction stir welds (FSW) between SS316L and …

This study focuses on the surface modification of 2524-T3 Al alloy substrates, highly
prospective in aeronautical sector, by niobium oxide films employing reactive sputtering …

This study employed the bobbin tool friction stir welding (BT-FSW) technique to weld 2219
aluminum alloy with 6 mm thickness. The microstructure investigation revealed that the weld …

Lightweight combat units, assault warplanes, and destroyers are being developed to
increase agility and resource efficiency. This is realized using lightweight frames composed …

The effect of microstructural inhomogeneity and pre-corrosion in 3.5% NaCl solution is
investigated on the fatigue crack nucleation behavior of welded AA2024-T3. The localized …

To achieve high-strength friction stir welded joints for large/extra-large thick plate structures,
the contradiction between increased softening of the weld due to increased heat input and …