A 300-mV low-power management system for energy harvesting applications
E Dallago, AL Barnabei, A Liberale… - … on Power Electronics, 2015 - ieeexplore.ieee.org
In this paper, a power management system (PMS) for low-voltage and low-power harvesters
is presented. The PMS consists of an energy storage module and a supply regulation (SR) …
is presented. The PMS consists of an energy storage module and a supply regulation (SR) …
pMOS‐only pW‐power voltage reference with sub‐10 ppm/° C trimmed temperature coefficient and sub‐100 ppm/V line sensitivity
In this paper, a new ultra‐low‐power voltage reference based on a two‐stage, all‐pMOS
topology operating in the subthreshold region is proposed to uniquely meet the pW‐power …
topology operating in the subthreshold region is proposed to uniquely meet the pW‐power …
A low‐power native NMOS‐based bandgap reference operating from 55°C to 125°C with Li‐Ion battery compatibility
The paper describes the implementation of a bandgap reference based on native‐MOSFET
transistors for low‐power sensor node applications. The circuit can operate from− 55° C to …
transistors for low‐power sensor node applications. The circuit can operate from− 55° C to …
Low temperature coefficient and low line sensitivity subthreshold curvature‐compensated voltage reference
A high‐order curvature‐compensated subthreshold voltage reference is proposed in this
paper. The proposed curvature‐compensated voltage reference consists of two supply …
paper. The proposed curvature‐compensated voltage reference consists of two supply …
A 0.4 V, 19 pW subthreshold voltage reference generator using separate line sensitivity and temperature coefficient correction stages
Sensor nodes and IoT systems require blocks that not only consume low power but also
have good accuracy. Voltage reference generators are also considered important building …
have good accuracy. Voltage reference generators are also considered important building …
A 26-ppm/oC, 13.2-ppm/V, 0.11%-inaccuracy picowatt voltage reference with PVT compensation and fast startup
J Hu, H Xu, J Wang, K Liang, C Lu, G Li - Microelectronics Journal, 2021 - Elsevier
This paper proposes a picowatt voltage reference for Internet-of-Things applications, which
require fast response speed and high insensitivity to variations of the process, supply …
require fast response speed and high insensitivity to variations of the process, supply …
A 28 ppm/° C, 2.54 ppm/V,− 77 dB@ 100 Hz pico-ampere voltage reference for high-end IoT systems
H Xu, C Lu, J Hu, T Du, J Wang, K Liang… - … -International Journal of …, 2019 - Elsevier
This paper presents a pico-ampere voltage reference for IoT systems with high performance
in line regulation and power supply rejection ratio (PSRR). Based on the leakage current …
in line regulation and power supply rejection ratio (PSRR). Based on the leakage current …
A portable class of 3‐transistor current references with low‐power sub‐0.5 V operation
This work proposes a new class of current references based on only 3 transistors that allows
sub‐0.5 V operation. The circuit consists of a 2‐transistor block that generates a proportional …
sub‐0.5 V operation. The circuit consists of a 2‐transistor block that generates a proportional …
A physical unclonable function based on a 2‐transistor subthreshold voltage divider
In this paper, a compact circuit solution for silicon‐based static physical unclonable functions
(PUFs) is presented. The proposed solution exploits the variability of a simple voltage …
(PUFs) is presented. The proposed solution exploits the variability of a simple voltage …
A 0.7 V, 2.7 μW, 12.9 ppm/° C over 180° C CMOS subthreshold voltage reference
An all‐CMOS, low‐power, wide‐temperature‐range, curvature‐compensated voltage
reference is presented. The proposed topology achieves a measured temperature …
reference is presented. The proposed topology achieves a measured temperature …