Additive manufacturing has advantages of cutting the time from design to making new parts
but it suffers from metallurgical defects such as porosity. For example, wired arc additive …

Al–Li alloy is a new structural material with the advantages of lightweight and high strength.
The extrusion profiles of Al–Li alloy are widely used in aerospace and other fields, which …

Peripheral coarse grain (PCG) structure is a common microstructural defect appearing in the
aluminum alloy extrusion process, which seriously affects the mechanical properties of the …

In this paper, aging precipitates and their high effects on mechanical properties of squeeze-
cast Al–5Cu-0.6 Li-0.5 Mn-0.3 Mg-0.15 Ti alloy (a novel Al–Cu–Li–Mn alloy) were …

In this study, the T85-treated Al-3.78 Cu-1.17 Li-0.7 Mg-0.32 Ag-0.25 Mn-0.33 Zn-0.12 Zr
alloy thermally exposed at a series of temperatures (100–300° C) for 100 h, 500 h, and 1000 …

The flow behaviors of 300M steel are studied by hot compression experiments at the
deformation temperatures of 1173~ 1423 K and strain rates of 0.01~ 10 s− 1. The flow stress …

In this study, the effects of heat treatment on the microstructure and mechanical properties of
extruded 2196 Al-Cu-Li alloy were examined and the precipitation behavior and …

In this paper, the microstructural evolution, precipitation behavior and mechanical properties
of 2195 Al-Li alloys prepared by powder metallurgy (PM) combined with hot extrusion were …

Abstract 2195 Al-Li alloy is one of the most important structural materials in the aerospace
industry in recent years because of its advantages, such as low density, high strength, good …

Extruded profiles/sections are increasingly used in the transport industry for lightweight
structures. In this paper, a wide thin-ribbed aluminium profile with asymmetric Z-shape, was …