Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs)
The metal-matrix composites/nano-composites (MMCs/MMNCs) reinforced with hard
ceramic particulates have received a tremendous attention due to their potential …
ceramic particulates have received a tremendous attention due to their potential …
On the interactions between molten aluminum and high entropy alloy particles during aluminum matrix composite processing
The feasibility of adding AlCrTiV high entropy alloy (HEA) particles to molten aluminum to
make metal matrix composites was studied. Equiatomic AlCrTiV HEA particles, produced by …
make metal matrix composites was studied. Equiatomic AlCrTiV HEA particles, produced by …
Vacuum brazed Ni-based coating reinforced with core-shell WC@ Cu/Co-P
Improving the wettability and bond strength of WC with Ni-based matrix and preventing the
growth of WC in the melt of Ni-based alloy are always the challenges that should be …
growth of WC in the melt of Ni-based alloy are always the challenges that should be …
Reinforcement mechanism and wear resistance of Al2O3/Fe-Cr-Mo steel composite coating produced by laser cladding
X Duan, S Gao, Q Dong, Y Zhou, M **, X **an… - Surface and Coatings …, 2016 - Elsevier
The nanometer Al 2 O 3 dispersion strengthened Fe–Cr–Mo composite coatings by
crosscurrent CO 2 laser on 316L steel were produced. The microstructure and phase …
crosscurrent CO 2 laser on 316L steel were produced. The microstructure and phase …
Aluminium matrix composite materials reinforced by 3D-printed ceramic preforms
This article employed the fused deposition modelling (FDM) method and gas-pressure
infiltration to manufacture alumina/AlSi12 composites. Porous ceramic skeletons were …
infiltration to manufacture alumina/AlSi12 composites. Porous ceramic skeletons were …
Effect of electroless coating parameters and ceramic particle size on fabrication of a uniform Ni–P coating on SiC particles
The formation of a uniform nickel phosphorous (Ni–P) electroless (EL) coating on micron-
sized SiC particles was investigated in this study. Metal coated ceramic particles could be …
sized SiC particles was investigated in this study. Metal coated ceramic particles could be …
Hot corrosion behaviour of a Ni+ CrAlYSiN composite coating in Na2SO4–25 wt.% NaCl melt
L Zhu, S Zhu, F Wang - Applied surface science, 2013 - Elsevier
Ni+ CrAlYSiN nanocrystalline composite coatings and NiCrAlYSi reference coatings were
prepared by vacuum arc evaporation on the Ni-based K438 superalloy. The aim of this work …
prepared by vacuum arc evaporation on the Ni-based K438 superalloy. The aim of this work …
A comparison study of applying metallic coating on SiC particles for manufacturing of cast aluminum matrix composites
Ceramic particles typically do not have a sufficiently high wettability for incorporation into
molten metal during aluminum matrix composite manufacturing. Metallic coatings on …
molten metal during aluminum matrix composite manufacturing. Metallic coatings on …
Dry sliding wear of gradient Al Ni/SiC composites
The influence of the applied load, sliding speed, and sliding distance on the dry sliding wear
of gradient Al Ni/SiC composites was studied. The aluminum–nickel matrix composites …
of gradient Al Ni/SiC composites was studied. The aluminum–nickel matrix composites …
Preparation of nickel-coated titanium carbide particulates and their use in the production of reinforced iron matrix composites
D Yi, P Yu, B Hu, H Liu, B Wang, Y Jiang - Materials & Design (1980-2015), 2013 - Elsevier
Ni-coated titanium carbide (TiC) composite powders were prepared by electroless plating
(EP). Further, using hot isostatic pressing (HIP), iron matrix composites reinforced with 4 wt …
(EP). Further, using hot isostatic pressing (HIP), iron matrix composites reinforced with 4 wt …