Laves phases with their comparably simple crystal structure are very common intermetallic
phases and can be formed from element combinations all over the periodic table resulting in …

This article presents an overview of the developments in stainless steels made since the
1990s. Some of the new applications that involve the use of stainless steel are also …

The microstructural evolution of the alumina-forming austenitic (AFA) steel subjected to
different cold rolling reductions during creep test at 973 K and 120 MPa was investigated by …

A new family of alumina-forming austenitic stainless steels is under development at Oak
Ridge National Laboratory for structural use in aggressive oxidizing environments at 600 …

The microstructure evolution and the mechanical properties of 15Cr–22Ni–1Nb austenitic
heat-resistant steel were investigated during the aging up to 24 h at 780° C, 820° C and …

The austenitic heat resistant-steels have been considered as important candidate materials
for advanced supercritical boilers, nuclear reactors, super heaters and chemical reactors …

A family of creep-resistant, alumina-forming austenitic (AFA) stainless steel alloys is under
development for structural use in fossil energy conversion and combustion system …

The oxidation behavior and mechanism of as-received and 30% cold-rolled alumina-forming
austenitic (AFA) steel were investigated in dry air at 700° C. The results show that the mass …

A family of creep-resistant austenitic stainless steels based on alumina (Al 2 O 3) scale
formation (AFA alloys) for superior high-temperature oxidation resistance was recently …

Heat-resistant materials, applied to manufacturing high-temperature components, are pivotal
for raising the steam temperature parameters of advanced ultra-supercritical power plants …