Abstract Two metrics Kernel Average Misorientation (KAM) and Image Quality (IQ) widely
used in Electron Back-Scatter Diffraction (EBSD) map** are compared with each other on …

The eutectic high-entropy alloys have shown promising mechanical behaviors while their
softening at elevated temperatures is still a challenge. Generally, the boundaries are the …

A combined experimental and strain gradient crystal plasticity framework is presented for
studying the development of orientation and misorientation gradients at the grain …

As one of the representative characteristics of plastic deformation, microstructural plastic
strain inhomogeneity has triggered a broad interest in uncovering the corresponding …

Abstract Effects of build orientation (0°, 45°, 90°) and post heat treatments (hot isostatic
pressing 820° C, 950° C or annealing 1020° C) on the fatigue crack growth rates (FCGRs) of …

Abstract Misorientation data from Electron Backscatter Diffraction (EBSD) is often used to
identify strain localisation and quantify plastic strain at the microstructural scale. However …

The high thermal gradients during the laser powder bed fusion (LPBF) process induce an
inhomogeneous microstructure with anisotropic mechanical properties. This study …

The effects of build orientation and post heat treatments on the tensile and fatigue crack
growth (FCG) behavior of commercially pure titanium (CP-Ti) manufactured by laser powder …

Microstructural plastic strain distribution evolution is highly heterogeneous even in single-
phase alloys. One of the important factors that govern this heterogeneity is slip/twinning …

In this study, an integrated crystal plasticity finite element–phase–field (CPFE–PF) model is
developed to examine dynamic recrystallization (DRX) in a dual phase Ti alloy. The CP …