Artificial alkali-activated aggregates developed from wastes and by-products: A state-of-the-art review
Natural resources depletion is gradually becoming a critical burden on the environmental
and ecological balance, pushing the development of artificial aggregates forward. In order to …
and ecological balance, pushing the development of artificial aggregates forward. In order to …
Recent advances in artificial aggregate production
Artificial aggregates (AAs) are man-made construction material, and the properties greatly
depend on its manufacturing process (eg granulation and hardening) and the raw materials …
depend on its manufacturing process (eg granulation and hardening) and the raw materials …
Tensile over-saturated cracking of ultra-high-strength engineered cementitious composites (UHS-ECC) with artificial geopolymer aggregates
Abstract Ultra-High-Strength Engineered Cementitious Composites (UHS-ECC)
incorporating artificial geopolymer aggregates (GPA) were developed and over-saturated …
incorporating artificial geopolymer aggregates (GPA) were developed and over-saturated …
The impact of cold-bonded artificial lightweight aggregates produced by municipal solid waste incineration bottom ash (MSWIBA) replace natural aggregates on the …
Currently, most of the municipal waste is incinerated and then transported to landfills for
disposal, which takes up a lot of land resources and causes safety problems due to the …
disposal, which takes up a lot of land resources and causes safety problems due to the …
Compressive strength prediction of lightweight concrete: Machine learning models
Concrete is the most commonly used construction material. The physical properties of
concrete vary with the type of concrete, such as high and ultra-high-strength concrete, fibre …
concrete vary with the type of concrete, such as high and ultra-high-strength concrete, fibre …
[HTML][HTML] Production and characterization of lightweight aggregates from municipal solid waste incineration fly-ash through single-and double-step pelletization process
The performance of a cold-bonding pelletization process was investigated for lightweight
aggregates (LWAs) production from municipal solid waste incineration (MSWI) fly-ash (FA) …
aggregates (LWAs) production from municipal solid waste incineration (MSWI) fly-ash (FA) …
The production and properties of cold-bonded aggregate and its applications in concrete: A review
The rapid increase in waste quantities, as well as the depletion of the natural resources in
the near future are some of the major concern worldwide. In response to these problems, as …
the near future are some of the major concern worldwide. In response to these problems, as …
Municipal woody biomass waste ash-based cold-bonded artificial lightweight aggregate produced by one-part alkali-activation method
The rapid industrialization process has resulted in the overconsumption of natural
aggregates, leading to significant environmental concerns. Additionally, the disposal of …
aggregates, leading to significant environmental concerns. Additionally, the disposal of …
Use of CO2 curing to enhance the properties of cold bonded lightweight aggregates (CBLAs) produced with concrete slurry waste (CSW) and fine incineration bottom …
In this study, concrete slurry waste (CSW) obtained from ready-mixed concrete plants was
recycled as a fresh cementitious binder and used together with municipal solid waste …
recycled as a fresh cementitious binder and used together with municipal solid waste …
Use of CO2-active BOFS binder in the production of artificial aggregates with waste concrete powder
This study investigated the possibility of using CO 2-active basic oxygen furnace slag
(BOFS) as binder for the production of AAs with low-value waste concrete powder (WCP) …
(BOFS) as binder for the production of AAs with low-value waste concrete powder (WCP) …