Concrete strength is dependent upon not only the water to cement ratio but also different
constituents of the concrete. The inclusion of natural zeolite (NZ) as an effective …

Composite materials have become the major materials of light-weight structure due to their
light weight, high strength, high modulus, and strong designability. However, as the …

A systematic methodology for develo** hybrid Al–SiC-graphite functionally graded
composite materials with the highest feasible SiC-content in the top-most layer, without …

In this study, in-situ neutron diffraction and finite element (FE) analysis were employed to
analyze the mechanical behavior of SiC/Al composites with 9 (M9) and 25 (M25) vol% SiC …

With rapid development of aerospace and automobile, the service condition of structural
components becomes increasingly harsh, diverse and high mechanical properties are …

Carbon nanotubes and boron carbide particles were added in aluminum alloy 5083 by
friction stir processing to obtain hybrid surface composites. Single pass approach was …

Different architectures of layered laminates comprising two exterior layers of Al-Mg-Si/SiC
metal matrix composite and an Al1050 ductile interlayer were fabricated by means of hot roll …

Dynamic recrystallization (DRX) is of great significance for the thermomechanical
processing and microstructural regulation of TiAl intermetallics. However, the underlying …

Abstract In this study, Al 0.6 CoCrFeNi high-entropy alloy particle reinforced 5052Al matrix
composites prepared via vacuum hot-pressing sintering were annealed. Experimental …

In this study, the researchers constructed nacre-inspired 2024Al/B 4 C composites with a
lamellar-interpenetrated structure using pressured infiltration of alloy melt into freeze-cast B …