[HTML][HTML] Maptperf: An RFC 8219 compliant tester for benchmarking MAP-T border relay routers
A Al-hamadani, G Lencse - Computer Networks, 2025 - Elsevier
Abstract The Benchmarking Working Group of IETF has published a comprehensive
methodology in its RFC 8219 for benchmarking IPv6 transition technologies. The Map** of …
methodology in its RFC 8219 for benchmarking IPv6 transition technologies. The Map** of …
[HTML][HTML] Benchmarking methodology for stateful NAT64 gateways
Abstract The benchmarking of Network Address and Protocol Translation from IPv6 clients to
IPv4 servers (stateful NAT64) gateways is challenging from a methodological point of view …
IPv4 servers (stateful NAT64) gateways is challenging from a methodological point of view …
Towards the scalability comparison of the Jool implementation of the 464XLAT and of the MAP‐T IPv4aaS technologies
G Lencse, N Nagy - International Journal of Communication …, 2022 - Wiley Online Library
Summary 464XLAT and MAP‐T are both IPv4‐as‐a‐Service technologies aiming to provide
IPv4 service to the customers, while ISPs use only IPv6 in their access and core networks …
IPv4 service to the customers, while ISPs use only IPv6 in their access and core networks …
[HTML][HTML] Benchmarking methodology for IPv4aaS technologies: Comparison of the scalability of the Jool implementation of 464XLAT and MAP-T
G Lencse, Á Bazsó - Computer Communications, 2024 - Elsevier
A novel method is proposed for the performance and scalability measurements of the IPv4-
as-a-Service (IPv4aaS) technologies. It works according to the dual Device Under Test …
as-a-Service (IPv4aaS) technologies. It works according to the dual Device Under Test …
[HTML][HTML] Design and implementation of a software tester for benchmarking stateful NATxy gateways: theory and practice of extending siitperf for stateful tests
G Lencse - Computer Communications, 2022 - Elsevier
Our siitperf is the world's first RFC 8219 compliant free software SIIT (Stateless IP/ICMP
Translation, also called stateless NAT64) benchmarking tool. It was written in C++ using …
Translation, also called stateless NAT64) benchmarking tool. It was written in C++ using …
Benchmarking stateless NAT64 implementations with a standard tester
G Lencse - Telecommunication Systems, 2020 - Springer
RFC 5180, the IPv6 update of RFC 2544, declared IPv6 transition technologies out of its
scope. RFC 8219 defined a benchmarking methodology for IPv6 transition technologies …
scope. RFC 8219 defined a benchmarking methodology for IPv6 transition technologies …
Design and implementation of a software tester for benchmarking stateless NAT64 gateways
G Lencse - IEICE Transactions on Communications, 2021 - search.ieice.org
The Benchmarking Working Group of IETF has defined a benchmarking methodology for
IPv6 transition technologies including stateless NAT64 (also called SIIT) in RFC 8219. The …
IPv6 transition technologies including stateless NAT64 (also called SIIT) in RFC 8219. The …
Equivalence and difference of the dual device under test setup and the single device under test setup of RFC 8219
G Lencse, S Szilagyi - International Journal of Communication …, 2025 - Wiley Online Library
RFC 8219 has defined a comprehensive benchmarking methodology for the IPv6 transition
technologies. It recommends two kinds of measurement setups: The dual device under test …
technologies. It recommends two kinds of measurement setups: The dual device under test …
Gaming with the throughput and the latency benchmarking measurement procedures of RFC 2544
In this paper, we investigate three potential issues of the benchmarking measurement
procedures defined in RFC 2544 and also used in RFC 5180 and RFC 8219. One of them is …
procedures defined in RFC 2544 and also used in RFC 5180 and RFC 8219. One of them is …
Adding RFC 4814 random port feature to siitperf: Design, implementation and performance estimation
G Lencse - International Journal of Advances in …, 2020 - ww.ijates.org
Siitperf is the World's first free software RFC 8219 compliant SIIT (also called stateless
NAT64) tester written in C++ using DPDK, which is also suitable for benchmarking IPv4/IPv6 …
NAT64) tester written in C++ using DPDK, which is also suitable for benchmarking IPv4/IPv6 …