In the present work, Al-xB 4 C nanocomposite (x= 0, 1, 2, 3, 4 and 5 in wt%, having the
average B 4 C size of 50 nm) were prepared using a high-energy ball mill. The milling times …

The demand for aluminum is very high worldwide because of its high strength, low density,
and high electrical and thermal conductivity. Aluminum and its alloys are widely used in …

In the present work, x wt% B 4 C (x= 2, 4, 6, 8) and 2 wt% BN reinforced aluminum 6061
metal matrix hybrid composites were synthesized by mechanical milling for 10 h. The milled …

High strength Al–AlN composites were synthesized via high-energy milling and sintering
technique. Al–Xwt.% AlN (X= 0, 2.5, 5 and 10) composite powders were milled in a planetary …

Abstract High entropy alloys Ni–Co–Cr–Fe–Mn–Cu x (x denotes the atomic fraction of
copper) were synthesized by powder metallurgy route. In this investigation, different Cu …

In the present study, the in situ powder metallurgy (IPM) process was employed to prepare a
powder feedstock for the fabrication of Al/SiC nanocomposites. Commercially pure (CP) …

In this investigation, nanocrystalline Mg 55 Cu 40 Ni 5 alloy has been synthesized from the
elemental powders by mechanical alloying (MA). Microstructural evolution, morphological …

The biocompatibility and biodegradability of magnesium (Mg), along with its lightness, make
magnesium-based materials promising for use in the biomedical industry. In this work …

Welding and riveting are the two fundamental joining processes for metals. Welding joints
have high strength than the riveting joints. But there is a high heat-affected zone in welding …

The thermal stability of nanostructured aluminum powder synthesized by high energy milling
was studied through isothermal annealing at high temperatures for various times. Strain …