This research emphasized on the influence of sintering temperatures on the microstructure
and physico-mechanical properties of Kpata fireclay brick and Qua'an Panfireclay brick were …

Iron oxide bearing wastes in form of dust and sludges are hard to handle because of their
micron size particles and moisture content in case of sludge. More often they are stockpiled …

In this paper, the Tl1-xHgxSr2Ca2Cu3O8+ δ compound with X=(0.0, 0.1, 0.2, 0.3 and 0.4)
was prepared by using the method of solid-state. The electrical resistivity was studied using …

This research evaluated the physical and mechanical properties of Aloji fireclay brick’ s
suitability for production of refractory fireclay brick as furnace linings. At the optimum …

In this research, kaolin, ball clay, sawdust and rice husk were used to produce insulation
bricks through the solid state synthesis method. Two temperatures, 1100 o C and 1200 o C …

Due to lack of good insulating refractory materials in commercial quantity, most of the
manufacturing and processing industries in develo** countries such as Nigeria depend …

Refractories are coarse-grained heterogeneous materials, usually multiphase ceramics, that
can withstand high temperatures and are typically used for the construction of high …

This study carries out physico-mechanical and thermal analyses of a produced bricks from
Ijero-Ekiti Quartz. This was with the view to investigate the utilization of Ijero-Ekiti Quartz for …

Kaolin and silica of 50 μm grain size were used in different weight percentage. Four
combinations have been selected as green compacted bodies. Different sintering …

The ceramic composite with different proportions of clay and silica was prepared with a grain
size of 70 μm and the weight percentage was selected for four groups (clayx silica100-x) …