The present article focuses on the current status of research and development concerning
corrosion resistance of Fe-Cr-based amorphous alloys and gives suggestions for further …

Among various materials available for alleviating the corrosion-related degradation, thermal
sprayed Fe-based metallic glass coatings (MGCs) have received huge attention from the …

Fe-based amorphous coatings were prepared on the surface of the AISI 1020 steel pipe by
high-speed laser cladding technique. This study is aimed to investigate the influence of …

The FeCrAlTiNb high-entropy alloy coatings are fabricated by magnetron sputtering method
to prevent the lead-bismuth eutectic (LBE) corrosion of structural components used in lead …

The effect of element Cu on microstructures and corrosion behavior of the directional
structure Ni-based coatings were investigated experimentally. The element Cu enhanced …

Abstract The Fe 34 Ni 20 Cr 20 Mo 5 B 4 C 4 P 12 Nb 1 high-entropy amorphous coatings
were fabricated via high-velocity air fuel (HVAF) with different heat input. The coating with …

In this study, the corrosion-wear behavior of a Fe-based amorphous alloy coating was
analyzed using a pin-on-ring corrosion abrasion system. The Fe-based amorphous alloy …

Laser cladding and laser remelting methods were adopted to prepare Fe-based amorphous
coating on H13 steel surface. And the organization and properties after laser cladding and …

In order to improve the microhardness and corrosion resistance of Ti6Al4V alloy, LaB 6
powders was added to the FeCoNiCrMo high entropy alloy coatings fabricated by laser …

Amorphous alloys without crystalline defects (dislocation, crystal boundary) are ideal
hydrophobic coating materials due to their low surface energy. This work used a synergistic …