The paper analyzes the stability and failure phenomenon of compressed thin-walled
composite columns. Thin-walled columns (top-hat and channel section columns) were made …

The object of the research are short, thin-walled columns with an open top-hat cross section
made of multilayer laminate. The walls of the investigated profiles are made of plate …

The subject of the paper is the progressive failure analysis (PFA) of thin-walled Z-shape
cross section members subjected to axial compression. This study concerns angle-ply multi …

The subject of the research was a short thin-walled top-hat cross-section composite profile.
The tested structure was subjected to axial compression. As part of the critical state …

Purpose: The aim of the work was to analyse the critical state of thin-walled composite
profiles with top-hat cross section under axial compression. Design/methodology/approach …

Thin-walled steel elements in the form of openwork columns with variable geometrical
parameters of holes were studied. The samples of thin-walled composite columns were …

Purpose: The aim of the study was to analyse the work of a thin-walled C-shaped profile,
made of a carbon-epoxy composite, which was subjected to unified axial compression …

The object of this study are thin-walled rectangular plates with a central cut-out under
uniform compression. The load is applied to the shorter and at the same time free-supported …

Buckling and postbuckling response of thin-walled composite plates investigated
experimentally and determinated analytically and numerically is compared. Real dimension …

The object of the study was a thin-walled profile with Z-shaped cross section made of the
carbon-epoxy composite. The material model was prepared based on the implemented …