Jetting is an important phenomenon that takes place when a solid metallic particle impacts a
substrate at high velocity. It consists of material extrusion at the periphery of the …

A simple technological method is proposed and tested experimentally, which allows for the
improvement of mechanical properties in sheet two-phase high-strength titanium alloys …

Strain field evolution on the surface of aluminum sheet D16 and 2024-T3 alloys has been
analyzed during static deformation and during specific high-speed impact and oscillation …

The purpose of this paper is to provide new experimental data for high-strength VT 22
titanium α+ β-type alloy under impact-oscillatory loading and dynamic non-equilibrium …

Pitting corrosion creates preferential sites for cracks formation by the exfoliation process,
which grow due to the continuous action of flight loads, even those of constant amplitude …

The full benefits of application the high strength low alloyed steels HSLA can be achieved if
the structures will be able to carry the alternate loads and fatigue cracks will not be formed …

Nano-silica modified potassium silicate conversion coating was deposited in different nano-
silica/potassium silicate ratios on the surface of 2024 aluminum alloy. The corrosion …

The band structures (microbands and shearbands) were first discovered and attracted
attention of researchers in connection with plastic flow localization and absence of …

This study shows the effect of the specific impact-oscillatory loading (Dynamical
nonequilibrium process) on the VT-22 titanium α+ β-type alloy mechanical properties and …

In this paper, the structure formation during the plastic deformation of polycrystalline nickel
and aluminum based alloy 2024-T3 is investigated. The possibility of the relaxation and …