This review provides a comprehensive summary of current hydrocracking applications, and
presents recent advances in the synthesis and structure/composition control of various …

The diminishing quality of oil feedstocks coupled with increasingly more stringent
environmental regulations limiting the content of sulfur in transportation fuels have given rise …

Abstract Ni 2 P/Ti-MCM-41 catalysts were successfully prepared under a lower reduction
temperature of 400° C, and the effects of Ti on the catalytic properties for …

The detailed hydrogenation (HYD) and direct desulfurization (DDS) pathways of thiophene
over the sulfur vacancy of different MoS 2 edge structures were investigated by density …

The sulfidation mechanism of supported NiW hydrotreating catalysts is described in detail
based on literature data and experiments for carbon-and alumina-supported NiW catalysts. It …

In this study, unsupported nickel-tungsten sulfide (NiWS (x)) particles, where x is the actual
molar ratio of Ni/W (x= 0, 0.005, 0.01, 0.02), were prepared, characterized with XRD, XPS …

Crystalline TS-1 zeolite nanorod (NTS-1) assemblies were successfully synthesized. NTS-1
possesses a hierarchically porous structure and a large nanoporous surface area. Following …

SBA-15 with pore diameter greater than 10nm was synthesized by varying the synthesis
parameters and adding swelling agent hexane and inorganic salt ammonium fluoride. Direct …

The siliceous and the metal substituted (B or Al)-SBA-15 molecular sieves were used as a
support for NiMo hydrotreating catalysts (12wt.% Mo and 2.4 wt.% Ni). The supports were …

This article proposes a novel cetyltrimethylammonium bromide-and fluorine-assisted
hydrothermal deposition method for modulating the morphology of supported metal …