Annealing temperatures and applied magnetic fields are two important parameters for the
performance modification of magnetic alloys. This article investigated the effect of different …

Alloys with composition Fe 80− x Cu 1 B 11 P 4 Si 4+ x (x= 0 and 4), ie with Si 4 at% or 8 at%
have been prepared by rapid quenching from the melt in air. For comparison the alloy with P …

The paper summarizes the current status of research in the field of magnetically soft
nanocrystalline materials especially highlighting the influence of alloy composition on …

Purpose: The paper presents and reviews the research results of soft magnetic composites
consisting nanocrystalline powders obtained by soaking and high energetic milling of …

Abstract Fe 73.5 Cu 1 Nb 3-x Si 17.5 B 5 Ti x (x= 0, 1, 2, 3) amorphous alloys were prepared
by the single roller melt spinning method. The effects of Ti substitution for Nb on the …

(Fe, Co)–Zr, Hf)–Cu–B (HITPERM-type) alloys with variable Hf, Zr and Co content were
isothermally crystallised at 500–650° C for 1h, and the optimum nanocrystallisation …

The paper is devoted to the study of microstructural and magnetic properties of the Fe-based
amorphous ribbons after interference pulsed laser heating. The ternary amorphous alloy …

Purpose: The investigation results of crystallization, in temperature range of 300-700 C in
time 1 h, of amorphous Fe84Nb7B9 alloy. The alloy was obtained in tape form by planar …

The temperature dependence of initial permeability (μ iT), the average grain size (D), the
Curie temperature of amorphous phase (T c am) of a series of annealed (Fe 0.5 Co 0.5) 73.5 …

Purpose: In this paper results of experience of influence a structure (amorphous and
amorphous after structural relaxation) on the magnetic properties (the initial magnetic …