Photocatalytic TiO2 thin films and coatings prepared by sol–gel processing: a brief review
The use of nanostructured coatings is crucial to maintain clean surfaces in public transport,
shop** malls, parks, and hospitals. Megacities produce large amounts of pollutants in …
shop** malls, parks, and hospitals. Megacities produce large amounts of pollutants in …
Synthesis and characterisation of single and duplex ZnO/TiO2 ceramic films on additively manufactured bimetallic material of 316L stainless steel and Ti6Al4V
Selective laser melting (SLM), one of the Laser Powder Bed Fusion (LPBF) additive
manufacturing methods, has enabled the layered production of Ti6Al4V/316L layered …
manufacturing methods, has enabled the layered production of Ti6Al4V/316L layered …
Additive manufacturing of multiple layered materials (Ti6Al4V/316L) and improving their tribological properties with glow discharge surface modification
Abstract Selective Laser Melting (SLM), which is a kind of laser powder bed fusion additive
manufacturing technology, is commonly used in the manufacturing of AISI 316L stainless …
manufacturing technology, is commonly used in the manufacturing of AISI 316L stainless …
Effect of annealing temperature of titanium dioxide thin films on structural and electrical properties
Titanium dioxide (TiO2) thin films are deposited on silicon substrates by using sol-gel dip
coating technique. Annealing temperature was varied to investigate its effect on the surface …
coating technique. Annealing temperature was varied to investigate its effect on the surface …
Study of the effect of titanium dioxide hydrosol on the photocatalytic and mechanical properties of paper sheets
Different amounts of a stable aqueous TiO2 hydrosol were used to fabricate paper sheets
having photocatalytic activity. The TiO2 hydrosol was prepared in aqueous medium using …
having photocatalytic activity. The TiO2 hydrosol was prepared in aqueous medium using …
Oxidized fullerene/sol-gel nanocomposite for corrosion protection of AM60B magnesium alloy
Oxidized Fullerene (OF) nanoparticles were added to the hybrid sol-gel coating at different
concentrations (0–500 mg L− 1). Improvement in the surface morphology of the coatings via …
concentrations (0–500 mg L− 1). Improvement in the surface morphology of the coatings via …
Dipcoating of poly (ε-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion protection
Surface modification of metallic implants is often required to facilitate positive interaction
between the implant and the surrounding hard tissue. In the present study, a polymer …
between the implant and the surrounding hard tissue. In the present study, a polymer …
Impact of annealing temperature on structural, morphological and optical properties of GO-TiO2 thin films prepared by spin coating technique
Thin films of graphene oxide–titanium dioxide were synthesized by spin coated on glass
substrates. Annealing in air from room temperature to 300, 400 and 500° C and at heating …
substrates. Annealing in air from room temperature to 300, 400 and 500° C and at heating …
Review of the sol–gel method in preparing nano TiO2 for advanced oxidation process
C Chang, S Rad, L Gan, Z Li, J Dai… - Nanotechnology …, 2023 - degruyter.com
Application of nano titanium dioxide (TiO2) in various fields such as advanced oxidation
process (AOP) has led to the development of its preparation technologies. The sol–gel …
process (AOP) has led to the development of its preparation technologies. The sol–gel …
Effect of substrate on surface morphology and photocatalysis of large-scale TiO2 films
Nanostructured TiO2 films were prepared on a variety of substrates, including acid frosted
soda-lime glass, acid frosted soda-lime glass pre-coated with a SiO2 barrier layer …
soda-lime glass, acid frosted soda-lime glass pre-coated with a SiO2 barrier layer …