The activation of deformation mechanisms in face-centered cubic materials is considered
closely related with the stacking fault energy. Experimentally determined stacking fault …

Tuning phase constitution can exert positive influence on mechanical properties, but it is
generally considered impracticable in compositionally complex alloys due to kinetic …

Novel face-centered cubic (FCC) phase CoCrFeMnNi-based medium-and high-entropy
alloys (M/HEAs) with the following nominal compositions Co 15 Cr 15 Fe 50 Mn 10 Ni 10 …

Coarsening is a metallurgical process that is related to solute transmission and system
energy decrease. However, for the coarsening behavior of the L1 2 precipitate in high …

The microstructural evolution of a Co-based high-entropy alloy (HEA) was examined using
electron microscopies, confirming the prominent presence of stacking faults (SFs) and …

In contrast to conventional alloys, which consist of one or two dominant metals with a pinch
of other alloying elements, high entropy alloys (HEAs) are a new family of alloys usually …

This study concerns reverse austenitic transformation of plastic strain-induced hexagonal
close-packed martensite. With the aid of in situ synchrotron X-ray diffractometry, the kinetic …

The Fe 50 Mn 30 Cr 10 Co 10 high entropy alloy has attracted research interest in recent
years due to its ability to overcome the strength-ductility trade-off. A recent study reported …

Abstract Cantor alloy (Fe 20 Co 20 Cr 20 Ni 20 Mn 20) and its derivatives, as the extensively
studied chemically complex alloys (CCAs), exhibit remarkable ductility but relatively low …

Investigation of Deformation Mechanisms in Strong and Ductile Alloys Page 1 General rights
Copyright and moral rights for the publications made accessible in the public portal are retained …