Modeling, analysis and mitigation of radiated EMI due to PCB ground impedance in a 65 W high-density active-clamp flyback converter
This article first reviewed the modeling and prediction techniques for the radiated
electromagnetic interference (EMI) in active-clamp flyback (ACF) power converters. An …
electromagnetic interference (EMI) in active-clamp flyback (ACF) power converters. An …
A review of radiated EMI research in power electronics systems
Radiated electromagnetic interference (EMI) is a very important research topic in power
electronics systems in recent years as the switching frequencies of power electronics …
electronics systems in recent years as the switching frequencies of power electronics …
Review of radiated EMI modeling and mitigation techniques in power electronics systems
Radiated electromagnetic interference (EMI) is a very important research topic in power
electronics systems in recent years as the switching frequency of power electronics …
electronics systems in recent years as the switching frequency of power electronics …
[HTML][HTML] Deep learning for both broadband prediction of the radiated emission from heatsinks and heatsink optimization
Heatsinks have quasi-antenna behavior in many cases and cause interference both at the
system level and at the PCB design level. Therefore, determination or prediction of both …
system level and at the PCB design level. Therefore, determination or prediction of both …
[HTML][HTML] A new fire-resistant thin pyramidal absorber based straw and gypsum powder for cost-effective EMC test chambers
In this study, low-cost, easy-fabrication, hollow, and thin pyramidal absorbers based on
straw and gypsum powder (SGP-PA) are designed and fabricated for EMC test chambers …
straw and gypsum powder (SGP-PA) are designed and fabricated for EMC test chambers …
[HTML][HTML] Experimental analysis of phase shift modulation methods effects on EMI in dual active bridge DC-DC converter
Dual active bridge DC-DC converters (DAB) are one of the bidirectional converters and
mainly used in electric vehicles and micro grids. With the increasing number of electric …
mainly used in electric vehicles and micro grids. With the increasing number of electric …
A review of the emi effect on natural convection heatsinks
The active/passive heatsinks have recently garnered much attention due to their benefit to
keep the temperature of the electronic device and PCB/ICs in a certain range. They are …
keep the temperature of the electronic device and PCB/ICs in a certain range. They are …
Investigation of the radiation mechanism of heatsinks based on characteristic mode theory
Heatsinks may cause radiated emission and radio frequency interference problems when
they are mounted on printed circuit boards. In this article, the radiation mechanism of …
they are mounted on printed circuit boards. In this article, the radiation mechanism of …
Investigation of the Radiated Emission of Honeycomb Structured Aluminum Foam/Cellular Heatsinks at 1-10 GHz
Metal foams or cellular structures like honeycombs, can also be evaluated according to
mechanical, acoustic, thermal, and chemical resistance parameters in terms of functionality …
mechanical, acoustic, thermal, and chemical resistance parameters in terms of functionality …
A novel broadband double-ring holed element metasurface absorber to suppress EMI from PCB heatsinks
In this study, a new Broadband Double Ring Hole Element (BDHE) meta-surface absorber is
studied to suppress EMI from PCB heatsink for 1-12 GHz covering L, S, C, and X bands. The …
studied to suppress EMI from PCB heatsink for 1-12 GHz covering L, S, C, and X bands. The …