The wide range of alloy composition controllability for multi-principal element alloys
(MPEAs) may provide a great opportunity for discovering special forms of surface oxides to …

Underwater laser direct metal deposition (UDMD) was employed to deposit CoCrFeMnNi
High entropy alloy. The deposition layer exhibits a homogeneous microstructure with …

Due to the preferential oxidation of Cr in various corrosion-resistant alloys, Cr-depletion
extensively forms around the oxides and impairs passivation ability. This harmful effect has …

The corrosion behavior of the Al 0.3 Cr 0.5 Fe 2 Mn 0.25 Mo 0.15 Ni 1.5 Ti 0.3
compositionally complex dual-phase alloy was explored in a variety of electrolytes …

The kinetics of passive oxide film formation, its thickening, and composition on Ni-22Cr and
Ni-22Cr-6Mo wt% alloys were investigated at selected anodic potentials. Experiments were …

The influence of at% Cr on the spontaneous passivation of (CoFeNi)(1-x)/3 Cr x alloys in 0.1
MH 2 SO 4 was investigated. During spontaneous passivation, Cr enrichment occurs due to …

Corrosion would lead to the failure of materials during service, causing huge economic
losses and catastrophic accidents, particularly in chemical industries. In this work, a series of …

Al-based metallic glasses (MGs) effectively circumvent the longstanding tradeoff between
corrosion resistance and mechanical properties inherent in commercial Al alloys due to their …

The passive behaviour of non-equiatomic multi-principal element alloys, Ni (58-x)
Co20Cr22Ta x (x= 0, 0.64, 1.64, 3.39 at.%), was investigated in 0.1 MH 2 SO 4 at 25° C by …

Robust and sustained corrosion resistance in multi-principal element alloys (MPEA) requires
rapid repassivation, ie regrowth of the passive layer once it is damaged or destroyed at the …