Due to the extremely complex and strict service conditions of non-magnetic drill collars, the
friction, wear and corrosion will lead to their damage and failure. Therefore, the surface …

This work presents the Influence of T4 and T6 heat treatment on the wear behavior of coarse
and fine WC reinforced LM28 cast Composites. Production of the composites was achieved …

In this study, x wt.%(x= 0, 2, 6, 10) nanosized WC-reinforced Inconel 625 composites were
fabricated via circular oscillating laser direct energy deposition (LDED). Advanced …

The current study was performed to investigate the metal alloy LM28's wear characteristics,
strengthened by fine and coarse ZrO 2 were investigated after undergoing thermal treatment …

In this study, Inconel 625 (IN625) alloy and tungsten carbide (WC) with additive ratios of
10%, 30% and 50% by weight were coated on the magnesium alloy surface. The coating …

Several manufacturing industries recognise the value of titanium and its alloys in terms of
useful application as petroleum tubes due to the high specific strength, low modulus of …

The essence of this research was to examine the properties of Inconel 625 coated titanium
grade 5 for potential applications in relevant industries. The titanium was deposited through …

O fabrico aditivo por arco e fio (WAAM) é um processo que apresenta taxas de deposição
elevadas, com maior liberdade nas dimensões das peças a fabricar e um considerável …