Polybenzoxazines—new high performance thermosetting resins: synthesis and properties
Polybenzoxazine is a newly developed addition polymerized phenolic system, having a
wide range of interesting features and the capability to overcome several shortcomings of …
wide range of interesting features and the capability to overcome several shortcomings of …
Failure mechanisms in toughened epoxy resins—A review
AC Garg, YW Mai - Composites Science and Technology, 1988 - Elsevier
The subject of improving the fracture toughness of brittle epoxy resins is receiving significant
attention in order to improve the design strain of fiber-reinforced composites for aerospace …
attention in order to improve the design strain of fiber-reinforced composites for aerospace …
Processing and characterization analysis of pyrolyzed oil rubber (from waste tires)‐epoxy polymer blend composite for lightweight structures and coatings applications
In this experimental investigation, the authors have fabricated and characterized composites
made from pyrolysis oil rubber and epoxy resin. As the dum** of waste scrap tires poses a …
made from pyrolysis oil rubber and epoxy resin. As the dum** of waste scrap tires poses a …
Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies
AJ Kinloch, SJ Shaw, DA Tod, DL Hunston - Polymer, 1983 - Elsevier
The microstructure and fracture behaviour of an unmodified and a rubber-modified epoxy
have been studied. Values of the stress intensity factor, K Ic, at the onset of crack growth, the …
have been studied. Values of the stress intensity factor, K Ic, at the onset of crack growth, the …
Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies
The principal toughening mechanism of a substantially toughened, rubber-modified epoxy
has again been shown to involve internal cavitation of the rubber particles and the …
has again been shown to involve internal cavitation of the rubber particles and the …
Toughening mechanisms in elastomer-modified epoxies: Part 3 The effect of cross-link density
The role Of matrix ductility on the toughenability and toughening mechanism of elastomer-
modified, diglycidyl ether of bisphenol A (DGEBA)-based epoxies is investigated. Matrix …
modified, diglycidyl ether of bisphenol A (DGEBA)-based epoxies is investigated. Matrix …
Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber
R Thomas, D Yumei, H Yuelong, Y Le, P Moldenaers… - Polymer, 2008 - Elsevier
Epoxy resin based on diglycidyl ether of bisphenol A and varying content of hydroxyl
terminated polybutadiene were cured using an anhydride hardener. The ultimate aim of the …
terminated polybutadiene were cured using an anhydride hardener. The ultimate aim of the …
Toughening mechanisms in thermoplastic-modified epoxies: 1. Modification using poly (phenylene oxide)
An epoxy based on the diglycidyl ether of bisphenol A (DGEBA) has been modified with poly
(phenylene oxide)(PPO) and cured with piperidine. A two-phase alloy resulted, in which the …
(phenylene oxide)(PPO) and cured with piperidine. A two-phase alloy resulted, in which the …
Delamination—a damage mode in composite structures
AC Garg - Engineering Fracture Mechanics, 1988 - Elsevier
The composite structures have a tendency to delaminate which reduces the strength and
stiffness and thus limits the life of a structure. This behavior of composites has caused …
stiffness and thus limits the life of a structure. This behavior of composites has caused …
[HTML][HTML] The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles
An epoxy resin, cured using an anhydride hardener, has been modified by the addition of
pre-formed polysiloxane core-shell rubber (S-CSR) particles with a mean diameter of 0.18 …
pre-formed polysiloxane core-shell rubber (S-CSR) particles with a mean diameter of 0.18 …