Ceramic materials with high strength and chemical inertness are widely used as
engineering materials. However, the brittle nature limits their applications as fracture occurs …

Strontium titanate (SrTiO 3) is a versatile material with various applications but
understanding its mechanical properties, especially in polycrystalline form prepared via field …

Flash sintering is considered a promising energy-saving and efficient technology for
preparing high-temperature ceramics. The effects of limited current on flash sintering …

The effects of the current density and holding time on the densification and microstructure of
flash-sintered (FS-ed) magnesium aluminate (MgAl 2 O 4) ceramic discs were investigated …

Field-assisted sintering techniques are at the forefront of advanced energy-saving
procedures to create fully dense ceramic materials. At present, there is an extraordinary …

This study investigates the effects of limiting current density and current step rate on the
microstructure and hardness of current-step flash-sintered (CS-FS) disc-shaped MgAl 2 O 4 …

This study demonstrates the fabrication of dense AlN-based ceramics through the flash
sintering technique for the first time. Flash sintering was performed at a furnace temperature …

In this work, high-purity alumina ceramics were prepared by using two-step reverse polarity
flash sintering (PR-FS). The effects of the time distribution between the first flash and the …

Abstract Alumina (α‐Al2O3) is one of the most versatile engineering ceramics, and its
mechanical properties have been extensively studied. However, the micromechanical …

A flash sintering method at room temperature based on combined power supplies is
proposed in this paper. Flash sintering is performed in two steps. First, a high voltage is used …