Complex silicon carbide (SiC) ceramic components are difficult to fabricate due to their
strong covalent bonds. Binder jetting (BJ) additive manufacturing has the outstanding …

Stereolithography based additive manufacturing provides a new route to produce ceramic
architectures with complex geometries. In this study, 3D structured SiC ceramic architectures …

To synthesize lightweight and high-performance electromagnetic wave absorbing
composite, SiC nanowire (SiCnw) and conductive polymer polypyrrole (PPy) were …

Abstract Hi‐Nicalon™‐S SiC fiber strengths and Weibull moduli were measured after
oxidation for up to 100 hours between 700° C and 1400° C in wet and dry air. SiO2 scale …

Laminated SiCw/SiC ceramic composites were prepared by chemical vapor infiltration (CVI)
and tape casting, and the advantages of this method were investigated. The results showed …

An in situ SiC nanowire–SiC–Si/SiC–Si protective coating was prepared on C/C composites
by pack cementation and heat treatment. SiC nanowires suppressed the cracking of the …

Co/SiC catalysts were prepared to investigate the role of SiO x C y on SiC surface in the
catalytic performance for Fischer–Tropsch synthesis. SiC was pretreated by nitric acid with …

This paper reports on a novel solution to 3D print bulk components by stereolithography with
photosensitive ceramic-based slurries. We designed, realized and tested a novel apparatus …

Tape casting combined with layer stacking, debinding and sintering proved to be a suitable
technique for processing SiC-based multilayers to be used as thermal protection system for …

Thin‐walled (wall thickness, 100–2000 μm) mono‐and bilayered ceramic tubes in the
system Si–O–C–(N) were obtained by centrifugal casting of a polysiloxane/filler suspension …