Inconel 625, a nickel-based superalloy, is used in a wide range of applications including the
marine and petroleum industries under where it is subjected to harsh conditions such as …

In this study, the surface of AISI D2 steel, which has the most common usage area among
cold work tool steels, was coated with boride, vanadium carbide and boron-vanadium …

Wear behavior of four kinds of thermally sprayed coatings on steel tooth drill bits have been
investigated by micro-abrasion wear test. The fixed ball micro abrasion wear test was …

Thermal reactive diffusion (TRD) coating on a DIN 1.2367 die steel substrate was performed
in a powder mixture consisting of ferrovanadium, ferrochromium, ammonium chloride …

This article presents an easy and inexpensive method to elaborate superhydrophobic
surfaces. A superhydrophobic surface was prepared by spray coating a mixture of calcium …

In this study, specific wear rate (SWR) and coefficient of friction (COF) of the synthesized
samples in 55 [(Pb x Ca 1− x) O. TiO 2]− 44 [2SiO 2. B 2 O 3]− 1Ge with (0≤ x≤ 0.7 mol%) …

In this study, the AISI 304 steel specimens were boronized with nanoboron of the size of 10–
50 nm and commercial Ekabor 3 powders (< 1400 μm) at 950° C to 1000° C for 2 h and 4 h …

In this study, the abrasiveness property of blast furnace slags emerging as a waste material
in the production of crude iron was investigated. The abrasive slurry wear (ASW) method …

The abrasive wear characteristics of plasma-sprayed nanostructured yttria-stabilized
zirconia (YSZ) coatings on Inconel 718 substrates was evaluated using AFS 50/70-grade …

En este trabajo se utilizó un diseño experimental de Taguchi de arreglo ortogonal L9 con
tres réplicas R1, R2 y R3, que definió la combinación de parámetros a utilizar para aplicar …