A review of sand–clay mixture and soil–structure interface direct shear test
Natural soils are usually heterogeneous and characterized with complex microstructures.
Sand–clay mixtures are often used as simplified soils to investigate the mechanical …
Sand–clay mixtures are often used as simplified soils to investigate the mechanical …
[HTML][HTML] A review on the thermo-hydro-mechanical response of soil–structure interface for energy geostructures applications
Energy geostructures have been identified as a cost-effective mitigating strategy for the
adverse impact of climate change. Operation of energy geostructures results in temperature …
adverse impact of climate change. Operation of energy geostructures results in temperature …
Effect of temperature on the cyclic behavior of clay–structure interface
The shaft capacity of foundations highly depends on the monotonic and cyclic loads applied
to the soil–structure interface. In energy geostructures that exploit the heat of soil using earth …
to the soil–structure interface. In energy geostructures that exploit the heat of soil using earth …
One-dimensional thermal consolidation analysis of saturated clay with variable compressibility and permeability considering partial drainage boundaries
M Lu, J Sun, K Li - Computers and Geotechnics, 2023 - Elsevier
The nonlinear consolidation characteristics of saturated clay will be markedly impacted by
temperature. However, despite the ample progress of calculation methods for the one …
temperature. However, despite the ample progress of calculation methods for the one …
Experimental investigation of soil–structure interface behaviour under monotonic and cyclic thermal loading
The effect of temperature on the monotonic and cyclic shearing response of a soil–structure
interface is of critical importance for the application of thermal-active geo-structures. To …
interface is of critical importance for the application of thermal-active geo-structures. To …
Thermomechanical response of kaolin clay–concrete interface in the context of energy geostructures
The analysis and design of energy geostructures are mainly characterised by the
mechanical behaviour of the soil–structure interface in non-isothermal conditions. In this …
mechanical behaviour of the soil–structure interface in non-isothermal conditions. In this …
Stability analysis of unsaturated slopes under elevated temperatures
Several natural and man-made phenomena (eg, droughts, wildfires, shallow geothermal
technologies) can subject unsaturated slopes to elevated temperatures. However, the …
technologies) can subject unsaturated slopes to elevated temperatures. However, the …
On the shear failure mode of granular column embedded unit cells subjected to static and cyclic shear loads
Since the initial conception of geosynthetic encased columns (GECs), exhaustion of column
capacity due to vertical loads in bulging and punching failure modes were readily …
capacity due to vertical loads in bulging and punching failure modes were readily …
Cyclic thermomechanical response of fine-grained soil− concrete interface for energy piles applications
Understanding the behaviour of soil− structure interfaces is critical for addressing the
analysis and design of energy geostructures. In this study, the interface failure mechanism of …
analysis and design of energy geostructures. In this study, the interface failure mechanism of …
Effect of thermal cycles on sand–concrete interface under constant shear stress
Energy geostructures provide a profitable solution for structural support as well as the
heating and cooling of buildings. However, their activation can produce in structure and its …
heating and cooling of buildings. However, their activation can produce in structure and its …