2D boron nitride nanosheets for polymer composite materials

MG Rasul, A Kiziltas, B Arfaei… - npj 2D Materials and …, 2021‏ - nature.com
Hexagonal boron nitride nanosheets (BNNSs) are promising two-dimensional materials to
boost the mechanical, thermal, electrical, and optical properties of polymer nanocomposites …

[HTML][HTML] Interfacial characteristics of carbon nanotube-polymer composites: A review

J Chen, L Yan, W Song, D Xu - Composites Part A: Applied Science and …, 2018‏ - Elsevier
Recent research on the interfacial characteristics of carbon nanotube-polymer
nanocomposites is reviewed. The state of knowledge in the characteristics of the interface …

Reinforced carbon fiber laminates with oriented carbon nanotube epoxy nanocomposites: magnetic field assisted alignment and cryogenic temperature mechanical …

Y He, S Yang, H Liu, Q Shao, Q Chen, C Lu… - Journal of colloid and …, 2018‏ - Elsevier
The epoxy nanocomposites with ordered multi-walled carbon nanotubes (MWCNTs) were
used to influence the micro-cracks resistance of carbon fiber reinforced epoxy (CF/EP) …

[HTML][HTML] Micro-crack behavior of carbon fiber reinforced Fe3O4/graphene oxide modified epoxy composites for cryogenic application

Y He, Q Chen, S Yang, C Lu, M Feng, Y Jiang… - Composites Part A …, 2018‏ - Elsevier
The epoxy nanocomposites with Fe 3 O 4 modified graphene oxide (Fe 3 O 4/GO) were
used to influence the micro-cracks resistance of carbon fiber reinforced epoxy (CF/EP) …

[HTML][HTML] Enhancing mechanical strength of carbon fiber-epoxy interface through electrowetting of fiber surface

X Chen, K Wen, C Wang, S Cheng, S Wang… - Composites Part B …, 2022‏ - Elsevier
The interfacial shear strength between carbon fiber and polymer matrices plays a critical role
in bulk mechanical performances of carbon fiber-reinforced polymer composites. However …

[HTML][HTML] Mechanical strength of boron nitride nanotube-polymer interfaces

X Chen, L Zhang, C Park, CC Fay, X Wang… - Applied Physics …, 2015‏ - pubs.aip.org
We investigate the mechanical strength of boron nitride nanotube (BNNT) polymer interfaces
by using in situ electron microscopy nanomechanical single-tube pull-out techniques. The …

Mechanical and viscoelastic properties of wrinkled graphene reinforced polymer nanocomposites–Effect of interlayer sliding within graphene sheets

Y Wang, Z Meng - Carbon, 2021‏ - Elsevier
Multilayer graphene sheets (MLGSs) are promising nano-reinforcements that can effectively
enhance the mechanical properties of polymer matrices. Despite many studies on MLGSs …

Investigation of dynamic impact responses of layered polymer-graphene nanocomposite films using coarse-grained molecular dynamics simulations

Z Yang, CC Chiang, Z Meng - Carbon, 2023‏ - Elsevier
Polymer nanocomposite films have recently shown superior energy dissipation capability by
using the micro-projectile impact testing method. However, how stress waves interact with …

Electrostatic incitation on fiber surface for enhancing mechanical properties of fiber-reinforced composite

K Wen, H Ma, J Zhang, S Cheng, X Wang, Y Hui… - … Science and Technology, 2022‏ - Elsevier
The excellent wettability contributes to the formation of mechanical interlocking
morphologies at the interface as well as to the reduction of the internal defects in the …

Interlocking matrix and filler for enhanced individualization and reinforcement in polymer–single-walled carbon nanotube composites

J Villalva, A Rapakousiou, MA Monclús… - ACS …, 2023‏ - ACS Publications
Poor individualization and interfacial adhesion prevent single-walled carbon nanotube
(SWNT)–polymer composites from reaching outstanding mechanical properties. With much …