The trade-off between strength and ductility remains a persistent obstacle in the
development of advanced structural materials. In the present study, a novel dual …

This study employs polycrystal-based grain scale numerical simulations, utilizing crystal
plasticity finite element (CP-FE) method and simplified ro** model (SRM), to investigate …

The 2205 duplex stainless steel (DSS) produced by selective laser melting (SLM) exhibits
high strength (1078.8 MPa) but poor plasticity (15.2%) owing to the high cooling rate during …

In order to explore the corrosion resistance of duplex stainless steel under seawater
corrosion and the compressive stiffness of its reinforced concrete columns, this study first …

In the present work, effect of cold rolling and accelerated isothermal aging at 800° C on the
microstructural changes and corrosion behavior in a low molybdenum Fe-21Cr-5Mn-1.5 Ni …

The grain boundary segregation (GBS) of boron and microstructure evolution in a hot-drawn
Fe–B alloy are investigated utilising the Gleeble-1500, Auger electron spectrometer, time-of …

This study systematically and comprehensively evaluated the effects of rolling techniques
and grain orientations on ferritic stainless steel using electrochemical, immersion, cyclic …

In this paper, the effect of a novel heat treatment on the microstructure evolution and
corrosion resistance of S32101 was investigated, and the nucleation of equiaxial austenite …

In this study, a full view of the shear location was presented and ultrafine grain structure with
excellent thermal stability during 700–850° C was obtained through cold shearing and heat …

We followed the microstructural evolution of UNS S32205 duplex stainless steel during cold
rolling up to 79% reduction in thickness and at early stages of isothermal annealing at …