Modelling damage evolution in composite laminates subjected to low velocity impact
In this paper, the impact damage of composite laminates in the form of intra-and inter-
laminar cracking was modelled using stress-based criteria for damage initiation, and fracture …
laminar cracking was modelled using stress-based criteria for damage initiation, and fracture …
[HTML][HTML] Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation
High performance composite materials, such as Carbon–Fibre Reinforced Plastic (CFRP)
composites, are being increasingly used in aerospace industry, such as fuselage primary …
composites, are being increasingly used in aerospace industry, such as fuselage primary …
Effect of stacking sequence on Charpy impact and flexural damage behavior of composite laminates
The objective of this work is the characterization and the assessment of the damage in
CFRP composite laminates with different stacking sequences subjected to low velocity …
CFRP composite laminates with different stacking sequences subjected to low velocity …
Artificial neural network (ANN)-based residual strength prediction of carbon fibre reinforced composites (CFRCs) after impact
This study presents an artificial neural network (ANN) model for predicting the residual
strength of carbon fibre reinforced composites (CFRCs) after low-velocity impact. First, a …
strength of carbon fibre reinforced composites (CFRCs) after low-velocity impact. First, a …
Influence of hydrothermal ageing on the compressive behaviour of glass fibre/epoxy composite pipes
The effects of hydrothermal ageing on the crushing behaviour of glass fibre-reinforced epoxy
(GRE) pipes are discussed. Pipes with three different winding angles (±45°,±55°,±63°) were …
(GRE) pipes are discussed. Pipes with three different winding angles (±45°,±55°,±63°) were …
[HTML][HTML] Tensile failure analysis and residual strength prediction of CFRP laminates with open hole
M **ao, Z Yongbo, W Zhihua, F Huimin - Composites Part B: Engineering, 2017 - Elsevier
Failure patterns and damage mechanism of CCF300/QY8911 and T300/QY8911 composite
laminates with open hole had been investigated experimentally and numerically …
laminates with open hole had been investigated experimentally and numerically …
Mechanical properties of hybrid graphene nanoplatelet-nanosilica filled unidirectional basalt fibre composites
Basalt fibre (BF) is one of the most promising reinforcing natural materials for polymer
composites that could replace the usage of glass fibre due to its comparable properties. The …
composites that could replace the usage of glass fibre due to its comparable properties. The …
Tensile and flexural damage response of symmetric angle‐ply carbon fiber‐reinforced epoxy laminates: Non‐linear response and effects of thickness and ply‐stacking …
Advanced fiber reinforced composites have excellent specific strength and stiffness
properties, but tend to be limited by linear elastic response and sudden, brittle failure. This …
properties, but tend to be limited by linear elastic response and sudden, brittle failure. This …
[HTML][HTML] Numerical analysis and experiment of sandwich T-joint structure reinforced by composite fasteners
This study presents an investigation into the failure mechanism and strength improvement of
a sandwich composite T-joint bonded and reinforced by fasteners made of thermoplastic …
a sandwich composite T-joint bonded and reinforced by fasteners made of thermoplastic …
Damage assessment of composite structures using digital image correlation
The steady increase of Carbon-Fiber Reinforced Polymer (CFRP) Structures in modern
aircraft will reach a new dimension with the entry into service of the Boeing 787 and Airbus …
aircraft will reach a new dimension with the entry into service of the Boeing 787 and Airbus …