Numerous industrial applications, particularly those in the transport industry, require the
joining of dissimilar materials which offers considerable benefits in terms of low cost, design …

Friction stir welding (FSW) has enjoyed great success in joining aluminum alloys. As
lightweight structures are designed in higher numbers, it is only natural that FSW is being …

Microstructural heterogeneity in weld nugget zone (WNZ) of dissimilar AA7050-AA2024
friction stir welding joint and its effect on galvanic corrosion (GC) were explored. The …

Aerospace alloys with reduced wall thickness but possessing higher hardness, good tensile
strength and reasonable corrosion resistance are essential in manufacturing of structures …

The current study deals with the effect of silicon carbide (SiC) particle reinforcement on the
microstructure, texture evolution, and mechanical properties of the AA5083-O/AA6061-T6 …

In this analysis, friction stir processing (FSP) was applied to the Si rich TIG welded joint to
study the influence of multi-pass FSP (MPFSP) on microstructure, hardness and tensile …

Dynamic recrystallization (DRX), a resultant of severe plastic deformation occurring at
moderately high temperatures, plays a pivotal role in deciding the structural integrity of the …

Dissolution of strengthening precipitates and grain coarsening are the key factors that
dictate the mechanical properties of heat-treatable aluminium alloys. In this study, a feasible …

In this investigation, homogenously disseminated SiC reinforcement particles and a fine-
grained structure was accomplished by multi-pass friction stir processing (MPFSP) of …

Particle strengthening of in-situ Al-Mg 2 Si composites hinges on effective geometrical
parameters (size, distribution, morphology, and volume fraction) of the inherent primary Mg 2 …